Motorola GP360 Series Instrukcja obsługi
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Dwukierunkowe radio Motorola GP360 Series. Motorola GP360 Series 4 stron. Professional radio, power distribution and controller
Również dla Motorola GP360 Series: Arkusz specyfikacji (2 strony), Podstawowa instrukcja obsługi (18 strony), Informacje o usłudze (32 strony), Informacje o usłudze (30 strony), Informacje o usłudze (30 strony)
S . C . R
Rotary
Control
On/Off
Volume
Call
CCTV
Press
To
Talk
Personal
Call
Status Send
Charging Instructions
The radio unit charges overnight. Switch the radio
OFF, and place the radio and battery into the charger
Red LED
Battery is charging
Green LED
Battery is fully charged
Flashing Red
Fault, Call S.C.R. officer.
Flashing Yellow Charger is getting ready to charge
Flashing Green Battery is 90% Charged
Do not return a charged battery to the charger once
charged, this significantly reduces the battery life.
Do not leave the radio in the charger. Carry it with
you. Do not risk it being stolen at the till.
IF YOUR BATTERY CHARGER DISPLAYS A
FLASHING RED LIGHT, THIS INDICATES A
FAULT.
PLEASE CONTACT THE SCR OFFICER ON:
TEL: 0208 760 5448
Antenna
Alarm
Top LED
Loudspeaker
Mic
LCD Display
MOB: 0778 627 7705
Callsign
Operating Instructions
For the Motorola GP360
1. To switch on
Turn the Rotary Volume Control clockwise to about
half volume. The set switches on, the LCD display
shows S.C.R briefly and then the name of your store.
2. To make a call
Hold down the Press To Talk button (PTT) and speak
into the loudspeaker at a normal voice level. Once
your message if finished, release the PTT button to
Listen. Each time you make a call, your store name
is displayed on screen at Croydon CCTV Control,
where all S.C.R. activity is monitored.
3. To send an Alarm
Press in and hold the orange Alarm for about two
seconds. Croydon CCTV Control will receive an
audible alarm and will be able to position cameras on
your premises and will contact you urgently to identify
the problem.
4. To cancel the audible alarm signal
Press the EXIT key twice or reset your handset by
turning it off and back on again.