Epson Endeavor WG Biuletyn wsparcia produktu - Strona 12
Przeglądaj online lub pobierz pdf Biuletyn wsparcia produktu dla Pulpit Epson Endeavor WG. Epson Endeavor WG 15 stron. Using with ms windows 3.x stylus 400/800+/color printer driver
Również dla Epson Endeavor WG: Biuletyn wsparcia produktu (17 strony), Biuletyn wsparcia produktu (3 strony), Podręcznik (9 strony)
Drukuj stronę
EPSON AMERICA, INC.
Product Support Bulletin
Subject: Progression Incompatibilities
Date: 02/05/93
Page(s): 1 of 2
The purpose of this bulletin is to provide information on known
incompatibilities of the Epson Progression at the time of product introduction
and any subsequent resolutions.
1.
The NE2100 network interface card (and other similar bus master
cards) may cause fatal system parity errors under heavy load.
Resolution: Under investigation. A permanent solution may be
provided by a system board revision.
External 5.25" 1.2MB floppy disk drive by Pacific Rim isn't recognized
2.
by the system. The device driver loads correctly, but the drive is
always in a busy or not ready state. This results in the message
"Drive not ready".
Resolution: Pacific Rim has been notified of this issue. Note that
other parallel port-interfaced FDDs (such as MicroSolutions and
Sysgen) function correctly.
The IBM 3270 terminal emulation adapter and Entry-level software
3.
cause a total system lock-up when any key is pressed after character
remapping takes place.
Resolution: BIOS version 1.02.1.03.
4.
Western Digital VGA (1024) PRO 2 card does not work (blank screen).
Resolution: This card has been out of production and unavailable for
some time. Later versions of WD-based cards work correctly. This
should not be a major issue due to the performance of the built-in
Wingine video controller.
EPSON
PSB No: S-0152A
Originator: MWT