Dilux AP2011 Podręcznik użytkownika - Strona 5
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Sprzęt oświetleniowy Dilux AP2011. Dilux AP2011 7 stron. Decorative lighting – floor recessed series
Drukuj stronęCutting Instruction
1
According to the length of the multiple of the strip light minimum cutting unit,
measure the aluminum profile and mark the area need to be cut, and the cutting
blade is biased toward the portion to be cut.
2. Cautions：
It is recommended to slow down the speed when cutting. If the speed is too fast, the mask will be
damaged.
The inner profile do not install with strip light when cutting.
Fix it firmly when cutting, the fracture after cutting should be flat and not skewed. Round off the
fracture, ensure there is no burr, and the metal debris in the profile should be cleaned.
Recommended cutting speed 1000-1200rpm