Motorola TETRA MTP850 EX Podstawowa instrukcja obsługi - Strona 35
Przeglądaj online lub pobierz pdf Podstawowa instrukcja obsługi dla Dwukierunkowe radio Motorola TETRA MTP850 EX. Motorola TETRA MTP850 EX 44 stron. Tetra handportable terminal
Drukuj stronę
Emergency Mode
You can send and receive Emergency Group Calls in Trunked
Mode or in Direct Mode. If your terminal is configured to operate
through a gateway, Emergency calls can be placed through the
gateway.
You can initiate an Emergency Group Call to and receive it from:
• selected group (TMO and DMO) (if tactical emergency)
• pre-defined group (if non-tactical emergency).
Contact your Service Provider to know which is the selected mode.
Your Service Provider will configure the Emergency Alarm and Hot
Microphone features.
Emergency calls will be allocated emergency priority in the system.
Entering or Exiting Emergency Mode
To enter Emergency Mode, press and hold the Emergency button
at the top of the MTP850 Ex/MTP810 Ex.
The required time you need to press the Emergency button is set to
default to 0.5 seconds. The time can be configured by your Service
Provider.
To exit Emergency Mode, press and hold Exit. Your terminal will
switch to the Home display.
Sending an Emergency Alarm
Your MTP850 Ex/MTP810 Ex will send an Emergency Alarm to the
dispatcher (if configured by your Service Provider):
• Automatically, upon entering Emergency Mode.
• If you press the Emergency button again while the MTP850 Ex/
MTP810 Ex is in Emergency Mode.
After sending the alarm, the display will show one of the following
delivery reports:
• Alarm Sent
• Alarm Failed
In both cases, the display returns within a few seconds to the main
screen of the Emergency Mode.
Due to no delivery confirmation in DMO, Alarm Sent information
confirms only sending the alarm.
33