Motorola XTR446 Podręcznik użytkownika - Strona 8

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Dwukierunkowe radio Motorola XTR446. Motorola XTR446 17 stron. Pmr 446 two-way radios

Drukuj stronę

6864234V01-A_EN Final2.fm Page 7 Monday, August 14, 2006 3:38 PM

Selecting a Radio Channel

1.Press CH/SCAN. The channel number will begin to

flash.

2.Use the VOL/CH side button (+) or (-) to increase or

decrease the displayed channel number.

3.Press CH/SCAN to set the channel.

Interference Eliminator Code

Interference eliminator codes help minimize

interference by providing you with a choice of code

combinations.You can specify a different code for each

channel. each of the channels,1-8, may have any one

of the codes, 00-38, selected. Code 00 indicates no

code selected and your radio can receive a signal

regardless of the code setting on the transmitting radio.

Note: Handsets with different interference eliminator

codes will not be able to communicate with each

other.

SEL/

1.Press

. The code number begins to flash.

2.Use the VOL/CH side button (+) or (-) to increase or

decrease the displayed code number.

SEL/

3.Press

4 times to confirm the new code.

Channel Memory

Your radio allows you to store up to 10 combinations of

channel and interference eliminator codes in memory.

To store the channel memory:

MEM

1.Press and hold the

button for two seconds.

MEM

The

icon flashes and the memory number is

also displayed.

2.Use the VOL/CH side button (+) or (-) to increase or

decrease the displayed memory number.

SEL/

3.Press

to set the memory number. The

channel number is now displayed flashing.

4.Use the VOL/CH side button (+) or (-) to increase or

decrease the displayed channel number.

SEL/

5.Press

. The code number begins to flash.

6.Use the VOL/CH side button (+) or (-) to increase or

decrease the displayed code number.

SEL/

7.Press

to confirm the setting.

To use a channel using channel memory:

MEM

1.Press the

button. The

icon and the

memory number appears on the display.

2.Use the VOL/CH side button (+) or (-) to select the

memory number.

SEL/

3.Press

to confirm the selection.