Motorola VM75-3 Podręcznik użytkownika - Strona 16
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Elektroniczna niania Motorola VM75-3. Motorola VM75-3 30 stron. 5" video baby monitor
Również dla Motorola VM75-3: Skrócona instrukcja obsługi (2 strony), Skrócona instrukcja obsługi (2 strony)
Drukuj stronę
4.3.5
Set temperature format
The temperature reading from the temperature sensor at the back of the
Baby Unit will be displayed at the top of the Parent Unit LCD screen. You
can switch temperature format between Centigrade and Fahrenheit as
follows:
1. Press the M MENU button when the Parent Unit is in camera viewing mode.
2. Press the < LEFT/> RIGH button to select
3. Press the + UP /- DOWN button to select
4. Confirm with the OK button, and return to the main menu.
4.3.6
Add camera
You can connect one Parent Unit with up to four Baby Units(cameras).
To add a compatible camera to the Parent Unit, proceed as follows:
1. Press the M MENU button when the Parent Unit is in camera viewing mode.
2. Press the < LEFT/> RIGHT button to select add camera icon
3. Press the + UP /- DOWN button to select a number and confirm with the
OK button. The sound level indicator will flash in green rapidly while the
parent unit searches for a camera.
4. Hold down the PAIR button on the rear of the camera until an acoustic
signal is heard and the transmission image from the camera that has been
added appears on the screen.
4.3.7
Delete camera
If you wish to delete the connection to a camera, proceed as follows:
1. Press the M MENU button when the Parent Unit is in camera viewing mode.
2. Press the < LEFT/> RIGHT button to select delete camera icon
3. Press the + UP /- DOWN button to select the number of the camera that
you wish to delete.
4. Confirm with the OK button.
5. Press - DOWN button to select [X], and then OK to confirm delete.
Note: you cannot delete a camera if it is the only unit paired to the Parent
Unit.
6. Press the M MENU button to return to the main screen.
16
appears on the screen.
appears on the screen.
, press the OK button
o
o
C or
F.
Parent Unit Menu Options
.
.