Motorola B803 Podręcznik użytkownika - Strona 6

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Telefon bezprzewodowy Motorola B803. Motorola B803 47 stron. Dect 6.0 cordless answering system with bluetooth wireless technology
Również dla Motorola B803: Skrócona instrukcja obsługi (8 strony)

Drukuj stronę

GETTING STARTED

WARNING

Do not place your phone in the bathroom or other humid areas.

. CHOKING HAZARD - SMALL PARTS

Not intended for children under 3 yrs.

This product is not intended to be used as a toy or play thing.

Location

When choosing a location for your new phone, here are some important guidelines you should

consider:

• Avoid sources of noise and heat, such as motors, fluorescent lighting, microwave ovens,

heating appliances and direct sunlight.

• Avoid areas of excessive dust, moisture and low temperature.

• Avoid other cordless telephones or personal computers.

• Never install telephone wiring during a lightning storm.

• Never install telephone jacks in wet locations unless the jack is specifically designed for wet

locations.

• Never touch non-insulated telephone wires or terminals, unless the telephone line has been

disconnected at the network interface.

• Use caution when installing or modifying telephone lines.

HANDSET RANGE

Optimal range is reached when there are no other electrical appliances working within the range

area. Any obstruction between the base and handset will also reduce the range significantly.

SIGNAL STRENGTH

When out of range of the base, the screen shows SEARCHING FOR BASE. If you are on a call,

the line will hang up. Move back within in range. The handset will automatically re-connect to the

base.

Setting up

IMPORTANT

The base must be plugged into the electrical outlet at all times. Do not connect the telephone line

cord into the wall jack until the handset is fully charged. Only use the power adapter and

telephone line cord supplied with the product.

WHICH POWER ADAPTER?

The power adapter with the smaller pin plug is for the base unit and the power adapter with the

bigger pin plug is for the charger unit.

Connecting the base