Motorola B804 Podręcznik użytkownika - Strona 12
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Telefon bezprzewodowy Motorola B804. Motorola B804 47 stron. Dect 6.0 cordless answering system with bluetooth wireless technology
Również dla Motorola B804: Skrócona instrukcja obsługi (8 strony)
Drukuj stronę
In Idle or during call screening: Base speaker volume levels 1 to 8 are available. (Level 1
means speaker volume off)
SKIP BACKWARD
Press twice to playback the previous message; or repeats playing the current message
9
from its beginning if this key is pressed after 4s, which counting from the beginning of
date/time stamp; or plays the previous message (if any) from its beginning if this key is
pressed within 4s, which counting from beginning of date/time stamp.
ANNOUNCE
In Idle: Short press to play the current announcement.
10
Press and hold to start recording the personalized announcement of the current answer
mode after hearing a long beep. Release key to stop recording.
ANSWER ON/OFF/ ANNOUNCE MODE
11
Toggle among: Switch the answering machine on/off, Announce Only and Announce &
Record Mode
12
CHARGING CRADLE
BLUETOOTH KEYS
In Idle, to pair up Bluetooth cellular: Press any one for 2s to initiate cellular pairing mode,
the 7-seg LED will display and flash "C x" to initiate cellular pairing mode. X can be 1 or 2
13
and it depends on which key user pressed.
In idle, to pair up Bluetooth headset: Press and hold for more than 5 sec, the 7-seg LED will
display and flash "H" to initiate headset pairing mode.
FIND
14
Press to find/page all registered handsets.
Message counter display
2-digit 7-seg
Behavior
LED display
0
No messages.
0 (flashing)
The clock needs to be set.
Total number of old messages and memos, or message number currently
1-99
playing.
Total number of messages and memos. The number flashes when there are new
1-99
messages.
(flashing)
After a power failure, the number in the message counter will flash to indicate the
clock needs to be set.
10-99
Current remote access code while setting.
1-99
Elapsed time while recording a memo or announcement up to 90 seconds.
(counting)
99 (flashing)
A memo recording is longer than 99 seconds.
1-99 & F
Memory is full. Messages must be deleted before new message can be
(alternating)
recorded.
The system is answering a call, being accessed remotely, or the clock is being
--
set.
-- (flashing)
The system is being setup, initialized or messages are being deleted.
02, 04, 06, tS
Displayed while setting the number of rings.
1-8
Displayed for 2 seconds while adjusting the volume of base speaker.
HI, LO, OF
Displayed for 2 seconds while adjusting the volume of base ringer.
Paging
Paging is useful if you misplace your handset(s).
To start the paging tone:
• Press FIND on the base. This starts the paging tone on the handset(s) for 60 seconds.