Motorola B804 Podręcznik użytkownika - Strona 29

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Telefon bezprzewodowy Motorola B804. Motorola B804 47 stron. Dect 6.0 cordless answering system with bluetooth wireless technology
Również dla Motorola B804: Skrócona instrukcja obsługi (8 strony)

Motorola B804 Podręcznik użytkownika
3. Press MENU/SELECT and DIR / CID to select >DIAL TYPE.
4. Press MENU/SELECT and DIR / CID to select TONE or PULSE.
5. Press MENU/SELECT to save your preference and return to the feature menu.
6.3.3
Visual message waiting (voicemail) indicator
If you subscribe to a voicemail service offered by your local telephone company, the voicemail
waiting indicator feature will provide a visual indication when you have new voicemail messages.
The VOICEMAIL light on the telephone base will flash, and NEW VOICEMAIL and the icon will
appear on the handset screen(s).
NOTE
This feature does not indicate new answering system messages recorded on your phone.
6.3.3.1
Clear voicemail indication
Use this feature when the telephone indicates there is new voicemail but there is none (for
example, when you have accessed your voicemail while away from home). This feature only
turns off the displayed NEW VOICEMAIL message, icon and VOICEMAIL light; it does not delete
your voicemail message(s). As long as you have new voicemail messages, your local telephone
company will continue to send the signal to activate the visual message waiting indicator.
To manually turn off the new voicemail indicator:
1. Press MENU/SELECT when in idle mode to enter the feature menu.
2. Press DIR / CID to scroll to >SETUP BS.
3. Press MENU/SELECT and DIR / CID to select >CLR VOICEMAL. Press MENU/SELECT.
4. Press MENU/SELECT again to turn the voicemail indication off, or press OFF/BACK to cancel
the procedure.
NOTES
1. Telephone company voicemail may alert you to new messages with stutter (broken) dial tone.
Contact your telephone company for more details.
2. For information about using your voicemail service, contact your telephone company for
assistance.
6.3.4
Home area code
If you dial seven digits to make a local call (no area code required), program your area code into
the telephone as the home area code. After setting, if you receive a call from within your home
area code, the caller ID history will only display the seven digits of the telephone number.
1. Press MENU/SELECT when in idle mode to enter the feature menu.
2. Press DIR / CID to scroll to >SETUP BS.
3. Press MENU/SELECT and DIR / CID to select >HOME AREA CODE. Press MENU/SELECT.
3. Press the dial pad keys to enter a three-digit home area code. Press DELETE/MUTE to delete
digit while entering.
4. Press MENU/SELECT to save and return to the main menu.
NOTE: If, in the future, your telephone service provider requires you to dial 10 digits to make a
local call (area code + phone number), re-program the home area code by following the steps
above. With the home area code displayed, press and hold DELETE/MUTE to remove the
contents. The home area code will now be restored to its default setting of _ _ _.
6.3.5
Base reset
1. Press MENU/SELECT when in idle mode to enter the feature menu.
2. Press DIR / CID to scroll to >SETUP BS.
3. Press MENU/SELECT and DIR / CID to select >RESET.
4. Press MENU/SELECT and RESET? will be prompted.
4. Press MENU/SELECT to confirm and reset all the personalized settings of base to default.