Motorola CD4012 Skrócona instrukcja obsługi - Strona 11
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Telefon bezprzewodowy Motorola CD4012. Motorola CD4012 13 stron. Digital cordless telephone with answering machine
Drukuj stronę
7.
Help
The
is not scrolling during charge
•
Bad battery contact – move the handset slightly.
•
Dirty contact – Clean the battery contact with a cloth moistened with
alcohol.
•
Battery is full – no need to charge.
No dialing tone
•
No power – check the connections. Reset the phone: unplug and plug back
in the mains.
•
Batteries are empty – charge the batteries for at least 16 hours.
•
You are too far from the base – move closer to the base.
•
Wrong line cable – use the line cable provided.
•
Line adaptor (when needed) is not connected to the line cord – connect the
line adaptor (when needed) to the line cord.
Poor audio quality
•
The base is too close to electrical appliances, reinforced concrete walls or
metal doorframes – move the base at least one meter away from any
electrical appliances.
The
is blinking or has disappeared
•
Handset is not registered to the base – register the handset to the base.
•
You are too far from the base – move closer to the base.
No ring tone
•
The ring tone is deactivated.
•
Increase the volume.
•
Make sure the Call Block mode is switched to off.
Caller ID service does not work
•
Check your subscription with your network operator.
A phonebook entry cannot be stored
•
The phonebook is full. Delete an entry to free memory.
No display
•
Try recharging the batteries.
•
Try disconnecting and connecting the base power supply.
•
If LED is not lit up, then try disconnecting and connecting the base
power supply.
Unable to register another handset
•
Maximum number of 4 handsets has been reached.
•
The display shows Searching. You must unregister a handset in order to
register a new one.
Noise interference on your radio or television
•
Your base or charger cradle may be too close. Move it as far away as
possible.
11