Motorola D1004 Podręcznik użytkownika - Strona 19
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Telefon bezprzewodowy Motorola D1004. Motorola D1004 26 stron. Digital cordless phone
Również dla Motorola D1004: Podręcznik użytkownika (45 strony), Podręcznik użytkownika (26 strony), Podręcznik użytkownika (50 strony)
Drukuj stronę
Auto prefix
You can set the D1000 to detect a dialling number and replace it with another number. The
number to be detected can be up to 5 digits long. It can be replaced with a number up to 10 digits.
m
d
1. Press
, scroll
to
ADVANCED SET
and press
d
m
2. Scroll
to PREFIX. Press
.
m
3.
DETECT DIGIT
is displayed. Press
.
4. Enter the number you want to be detected and press
m
5. Scroll to
PREFIX
NUM. and press
.
6. Enter the number you want it replaced with and press
>
7. Press
to return to standby.
Country
If you move to another country you can set your phone to be compatible with the network settings
of that country.
NOTE
If you make a mistake during welcome mode country selection, you can also reset your country.
Depending on your country, this option may be displayed as
displayed.
m
d
1. Press
, scroll
to
ADVANCED SET
and press
d
m
2. Scroll
to
SEL.
COUNTRY. Press
.
m
3. Enter the 4-digit master PIN and press
u
d
4. Scroll
or
to display the required country.
m
5. Press
to confirm.
Intrusion
When an external call is taking place, another handset registered to the base can join in, making
the call a 3-way conference, just by pressing
To enable this, Intrusion must be switched On.
m
d
1. Press
, scroll
to
ADVANCED SET
and press
d
m
2. Scroll
to INTRUSION. Press
.
u
d
3. Scroll
or
to
ON
or OFF.
m
4. Press
to confirm.
>
5. Press
to return to standby.
Advanced settings
m
.
m
.
m
.
NOT AVAIL
or you country may not be
m
.
.
<
.
m
.
ECO mode
To reduce the level of power emissions, you can select low power or ECO mode. When the ECO
mode is set to ON, the base transmission power will be reduced.
To turn ECO Mode to
ON
or OFF:
m
d
1. Press
, scroll
to
ADVANCED SET
and press
d
m
2. Scroll
to
ECO MODE
and press
.
u
d
3. Press
or
to highlight
ON
or
OFF
then press
-
A confirmation beep is emitted and the handset display will switch between the handset's
name and
ECO
MODE.
NOTE
When Eco Mode is set to ON, the handset range will be reduced.
m
.
m
to confirm.
19