Motorola L302 - DECT 6.0 Cordless Phone Podręcznik użytkownika - Strona 17
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Telefon bezprzewodowy Motorola L302 - DECT 6.0 Cordless Phone. Motorola L302 - DECT 6.0 Cordless Phone 38 stron. Digital
Również dla Motorola L302 - DECT 6.0 Cordless Phone: Skrócona instrukcja obsługi (2 strony), Skrócona instrukcja obsługi (8 strony), Podręcznik użytkownika (43 strony), Skrócona instrukcja obsługi (8 strony)
Drukuj stronę
Doc Title
:
Product Data – User's Guide
Model
:
L401 series & L301 series
3
USING THE PHONE
3.1
Calls
3.1.1
Make a call
1. Press <Talk on> or <Speaker>.
2. Dial the phone number.
3.1.2
Predial
1. Enter the phone number (maximum 32 digits). If you make a mistake, press <Clear> to delete a digit.
2. Press <Talk on> or <Speaker> to dial the phone number entered.
3.1.3
Dial one touch numbers 1 to 9
1. Press and hold a key from <1> to <9> until the number is displayed and dialed.
- If no number is stored, you hear a beep.
3.1.4
Call from the phonebook
1. Press <Phonebook>. The first entry in the phonebook is displayed.
2. Scroll <Up/Down> to the entry you want.
3. Press <Talk on> or <Speaker> to dial the number.
TIPS
Instead of scrolling to browse the phonebook entries, press the numeric key corresponding to the first letter of the
entry you wish to locate. For example, pressing <2> will show the entries starting with A. Pressing <2> again will
show the entries starting with B, etc.
3.1.5
Call from the calls list
NOTE
You need to subscribe to your network's Caller ID service to be able to see the caller's number in the calls list. See
Section "5. Caller ID" for more details.
1. Press <Call log>. The first entry in the call list is displayed.
2. Scroll <Up/Down> to the entry you want.
3. Press <Talk on> or <Speaker> to dial the number.
3.1.6
Answer a call
1. When the phone rings and flashes in the display, press <Talk on> or press <Speaker> to answer the call via the
loudspeaker.
WARNING
When the phone is ringing, avoid holding the earpiece too close to your ear as it may damage your hearing.
Handsfree activation can suddenly increase the volume in the earpiece to a very high level. Make sure the handset
is not too close to your ear.
TIPS
If Auto Talk mode (see Section 6.6 for more details) is on, simply lift up the handset from its base to answer the
call. The default setting is Off.
NOTE
An incoming call has priority over other events. Whenever there is an incoming call, other operations in progress
such as phone settings, menu navigation, etc. will be ended.
3.1.7
Adjust volume
1. During a call, press <Up/Down> to adjust the earpiece or loudspeaker volume.
- The level is shown in the handset display.
3.1.8
Mute
Mute the microphone so that you can talk to someone else in the room without your caller hearing you.
1. During a call, press <Mute/Clear>.
This document contains confidential and proprietary information of VTech Telecommunications Ltd
Revision :
Page(s) :
R.00
17 of 38