Motorola L402 - DECT 6.0 Cordless Phone Podręcznik użytkownika - Strona 6
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Telefon bezprzewodowy Motorola L402 - DECT 6.0 Cordless Phone. Motorola L402 - DECT 6.0 Cordless Phone 38 stron. Digital
Również dla Motorola L402 - DECT 6.0 Cordless Phone: Skrócona instrukcja obsługi (2 strony), Skrócona instrukcja obsługi (8 strony), Skrócona instrukcja obsługi (8 strony)
Drukuj stronę
Doc Title
:
Product Data – User's Guide
Model
:
L401 series & L301 series
1
GETTING STARTED
WARNING
Do not place your phone in the bathroom or other humid areas.
Location
When choosing a location for your new phone, here are some important guidelines you should consider:
• Avoid sources of noise and heat, such as motors, fluorescent lighting, microwave ovens, heating appliances and
direct sunlight.
• Avoid areas of excessive dust, moisture and low temperature.
• Avoid other cordless telephones or personal computers.
• Never install telephone wiring during a lightning storm.
• Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.
• Never touch non-insulated telephone wires or terminals, unless the telephone line has been disconnected at the
network interface.
• Use caution when installing or modifying telephone lines.
HANDSET RANGE
Optional range is reached when there are no other electrical appliances working within the range area. Any
obstruction between the base and handset will also reduce the significantly.
SIGNAL STRENGTH
When out of range of the base, the screen shows SEARCHING.... If you are on a call, the line will hang up. Move
back within in range. The handset will automatically re-connect to the base.
Setting up
IMPORTANT
The base station must be plugged into the power outlet at all times. Do not connect the telephone line cord into the
wall socket until the handset is fully charged. Only use the power and telephone line cords supplied with the
product.
WHICH POWER ADAPTER
The power adapter with the smaller pin is for the base unit and the power adapter with the bigger pin is for the
charger unit.
Connecting the base station
1. Plug the power adapter & telephone line cord into the base station.
2. Plug the other end of the power adapter & telephone line cord into the wall jack.
3. Always use the telephone line cord provided in the box.
4. Use only the provided adapter.
This document contains confidential and proprietary information of VTech Telecommunications Ltd
Revision :
Page(s) :
R.00
6 of 38