Motorola 89FT3798 Podręcznik - Strona 23

Przeglądaj online lub pobierz pdf Podręcznik dla Radio Motorola 89FT3798. Motorola 89FT3798 32 stron.

Drukuj stronę

#ELP_Display.book Page 23 Friday, May 14, 1999 5:39 PM

Sending a New Number (for radios

with keypad only)

You enter the phone number by pressing the

relevant keys on the keypad.

Method

Steps to Take

Enter the phone number by using the

Live Dial

keypad; the radio sends out the numbers

as the keys are pressed.

1. Enter the phone number by using

the keypad; the radio saves the

Buffered

selected numbers in a buffer.

Dial

2. Press and release the PTT; the

radio sends out the numbers in its

buffer.

The Phone Conversation

Once the radio has connected to the intended

party, you can begin the conversation. Even

though this is a phone call, your conversation

mimics a radio call (that is, both parties speak in

turn).

Press and hold the PTT, while talking into the

microphone.

Release the PTT when you ﬁnish what you

want to say, and wait for the response.

Repeat steps 1 and 2 until the conversation

ends.

NOTE: The radio starts a programmable Time-Out-

Timer the moment both parties stop transmitting

(talking). If the Time-Out-Timer expires, the radio

will end the phone call.

Ending the Phone Call

Just as the radio needs to send the access code

when starting a phone call, the radio needs to

send the deaccess code to end the phone call.

The radio can send the deaccess code in any of

the following ways:

• manual (for radios with keypad only), and

• automatic.

Check with your dealer for details.

If your radio sends the deaccess code manu-

ally, dial the deaccess code from the keypad.

Press the Phone button to exit phone mode.

NOTE: Radios using the automatic method

will

send

the

automatically.

Exit the phone mode using the menu:

deaccess

code

English