Motorola APX 7000 XE UHF Skrócona instrukcja obsługi - Strona 3
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Radio Motorola APX 7000 XE UHF. Motorola APX 7000 XE UHF 44 stron. Digital portable radios
Również dla Motorola APX 7000 XE UHF: Instrukcje (3 strony), Skrócona karta informacyjna (2 strony)
Drukuj stronę
m
®
ASTRO
APX™ 7000XE Series
Digital Portable Radios
Quick Reference Card
RF Energy Exposure and Product Safety
Guide for Portable Two-Way Radios
ATTENTION!
This radio is restricted to Occupational use only. Before using
the radio, read the RF Energy Exposure and Product Safety
Guide for Portable Two-Way Radios which contains important
operating instructions for safe usage and RF energy awareness
and control for Compliance with applicable standards and
Regulations.
Radio Controls
Top (Orange)
Button
__________
3-Position A/B/C
Microphone
Switch
__________
Secondary Speaker
Accessory
Connector
Menu Select
Buttons
Main Display
Data Feature
Home Button
Button
Keypad
4-Way Navigation
Button
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners.
16-Position
Select Knob
__________
On/Off/Volume
Control Knob
Top Side (Select)
Button
__________
PTT Button
Side Button 1
__________
Side Button 2
__________
Radio On/Off
• On – On/Off/Volume knob clockwise.
• Off – On/Off/Volume knob counterclockwise.
Zones and Channels
• Zone – Zone switch to desired zone.
• Channel – Channel switch to desired channel.
Receiving and Transmitting
Antenna
1
Select zone/channel.
2-Position
Concentric
2
Listen for a transmission.
Switch
OR
__________
Press and hold Volume Set button.
Top
OR
Display
Press Monitor button and listen for activity.
Bluetooth
3
Adjust volume, if necessary.
Pairing
Indicator
4
Press the PTT button to transmit; release to
receive.
Microphone
Sending an Emergency Alarm
Main
Speaker
1
Press and hold the Emergency button*.
2
The display shows Emergency and the
Battery
current zone/channel. Radio sounds a short,
medium-pitched tone, and the LED blinks red
momentarily.
3
When acknowledgment is received, you hear
four beeps; alarm ends; and radio exits
emergency.
* Default emergency button press timer is set
to 1 second. This timer is programmable, see
Sending an Emergency Alarm section in the
user guide for details.
To exit emergency at any time, press and hold
the Emergency button.
English