Motorola ASTRO APX O9 Skrócona instrukcja obsługi - Strona 4
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Radio Motorola ASTRO APX O9. Motorola ASTRO APX O9 44 stron. Control head mobile radio
Również dla Motorola ASTRO APX O9: Instrukcja instalacji (25 strony)
Drukuj stronę
O9CH_QRG.book Page 4 Tuesday, September 3, 2013 12:45 PM
Sending an Emergency Alarm
Press the Emergency button. A tone sounds
1
and the display shows EMERGENCY and the
current zone or channel.
A dispatcher acknowledgment ACK
2
RECEIVED display follows.
AND, Trunking Only:
A high-pitched tone indicates that the alarm
has been received by the trunked system's
central controller.
Press and hold the emergency button or the
3
PTT button to return to normal operation.
To exit emergency at any time, press and hold the
Emergency button.
Sending an Emergency Call (Trunking
Only)
Press the Emergency button.
1
A tone sounds and the display shows
1
EMERGENCY and the current zone or channel.
OR
A talk prohibited tone sounds when the
selected channel does not support
emergency.
Press and hold the PTT button. Speak clearly
2
into the microphone.
Release the PTT to end the transmission.
3
To exit emergency at any time, press and hold the
Emergency button.
Sending a Silent Emergency Alarm
Press the Emergency button to activate the
1
silent alarm feature.
The display does not change; the LED does
2
not light up, and there is no tone.
English
If silent emergency alarm is used with emergency call,
pressing the PTT button exits the silent mode and
initiates the emergency call.
Display Status Icons
Receiving a call or data
Transmitting a call or data
The more stripes, the stronger the
signal strength for the current site
(trunking only).
Direct radio to radio communication or
O
connected through a repeater.
On = Direct
Off = Repeater
M
This channel is being monitored.
K
Voice muting the affiliated trunking
talkgroup or selected conventional
channel.
On = Enabled
Off = Disabled
H
.
L = Radio is set at Low power.
H = Radio is set at High power.
OR
i
Scanning a scan list.
Blinking dot = Detects activity on the
Priority-One Channel
during scan.
Steady dot = Detects activity on the
Priority-Two Channel
during scan.
< or > to Menu
- directly below
Entry.
Menu Entry to select.
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used
under license. All other trademarks are the property of their respective owners.
k
The vote scan feature is enabled.
On = Secure operation.
m
Off = Clear operation.
Blinking = Receiving an encrypted
voice call.
On = AES Secure operation.
l
Off = Clear operation.
Blinking = Receiving an encrypted
voice call.
On = Location feature enabled, and
location signal available.
G
Off = Location feature disabled.
Blinking = Location feature enabled,
but location signal
unavailable.
On = User is currently associated with
n
the radio.
Off = User is currently not associated
with the radio.
Blinking = Device registration or user
registration with the server
failed due to an invalid
username or pin.
o
Data activity is present.
Indicates that the text entry is currently
in hexadecimal mode.
Alternates between red and blue when
the lightbar is on.
Menu Navigation
U or D to scroll
- directly below
through sub-list.
Menu Entry to select.
H to exit.