Motorola GM Series Instrukcja instalacji - Strona 10
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Radio Motorola GM Series. Motorola GM Series 36 stron. Professional radio
Również dla Motorola GM Series: Informacje o usłudze (34 strony), Instrukcja serwisowa (28 strony)
Drukuj stronę
1-2
The following table lists power cables available for this radio:
Number
HKN4137_
HKN4191_
2.2
Power Cable Installation Procedure
Begin the power cable installation as follows:
1.
Determine a routing plan, keeping in mind where the radio is to be mounted.
CAUTION: Improper handling with the power cable may cause shorting to ground. Ensure
!
that during radio installation the power cable fuse is removed.
2.
Locate an existing hole with grommet in the vehicle fire wall, or use a 9.5 mm (3/8-inch) bit to
drill an access hole in the fire wall. Install a grommet with a 5 mm (3/16-inch) inside diameter
into the hole to protect the power cable.
CAUTION: Be very careful not to damage existing wires.
!
3.
From inside the vehicle, feed the red and black leads (without the lugs attached) through the
access hole and into the engine compartment. (See Figure 1-1 Power Cable Routing into the
Engine Compartment)
To Radio
Table 1-1 Power Cables
Description
Low power cable to battery
High Power Cable to battery
Red Lead
Figure 1-1 Power Cable Routing into the Engine Compartment
1-25W; 15A fuse; 14 AWG 3m
25-45W; 20A fuse; 12 AWG 3m
Black Lead
Grommet
Engine Compartment
INSTALLATION
Rating
Firewall
FL0830246-O
FL0830246-O