Motorola T3 Podręcznik użytkownika - Strona 20
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Radio Motorola T3. Motorola T3 50 stron. User guide
Również dla Motorola T3: Skrócona instrukcja obsługi (2 strony), Broszura (2 strony), Podręcznik (38 strony)
Drukuj stronę
System Administration
file delete <string(file)>
d.
Delete a file from the file system
file dir
e.
List the files in the system and display the remaining storage
file exec <string(file)>
f.
Executes a file as a set of configuration commands. Note that "file" is a local file in the file system. The file
must have previously been copied to the filesystem from the external server using the file copy command.
C
o
n
f
i
g
u
r
a
t
i
o
n
F
C
o
n
f
i
g
u
r
a
t
i
o
n
F
From the webUI, the administrator can save and load configuration files. Note that these configuration files are
non-editable binary format for configuration security. If editable configuration is desired, use the CLI script files.
Configuration files from the webUI can be used to create secure template configurations.
Note: The Configuration File contains every configuration possible including the "Admin" account password.
When combined with RADIUS network authentication, the non-editable Configuration Files provide a secure
method to pre-configure systems in a staging area and apply the secure "admin" password without revealing the
password. Contact a Motorola support person for assistance with a setting up secure, staged configurations.
To save or load a Configuration file from the webUI, access the System – Configuration screen from the webUI.
Follow these steps to create a template configuration file:
1. Configure a complete system configuration
2. Set the system name to "template configuration" or similar name
3. Save the configuration file using the webUI System-Configuration screen
Follow these steps to apply the template to a new system:
1. Boot a new system
2. Using the serial console login, set the IP address (or use the default IP address)
3. Reboot the system to apply the IP address
4. Login via the webUI
5. Load the template configuration file using the System-Configuration screen
6. Change the system name to the correct name
7. Change the IP address to the correct IP address
8. Power off or reboot the system. The next time the system is booted, it will have the complete
configuration with the correct IP address and system name.
Motorola, Inc.
i
l
e
s
u
s
i
n
g
t
h
e
w
i
l
e
s
u
s
i
n
g
t
h
e
w
570510-001-00 rev A
e
b
U
I
e
b
U
I
Page 20 of 50