Motorola ASTRO XTS-5000 Instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przenośne radio Motorola ASTRO XTS-5000. Motorola ASTRO XTS-5000 5 stron. Motorola xts5000 portable radio
Również dla Motorola ASTRO XTS-5000: Instrukcja obsługi i rozwiązywania problemów (2 strony), Skrócona instrukcja obsługi (4 strony), Instrukcja edycji (3 strony)

Press the Side Button 2 briefly to display the current site with which your radio is affiliated.

The radio will display the repeater site you are affiliated with for approximately two seconds.

The radio will then display the Received Signal Strength Indicator (RSSI) and a number

between 0 and 120 (any number above 60 is considered good). After approximately two

seconds, the radio will return to normal operation.'

To force the radio to affiliate with a different repeater site, press and hold the SITE button

(side button #2) until SCANNING appears in the display. The radio will attempt to affiliate

with a different repeater site. The radio may affiliate with a different site, or it may re-affiliate

with the same site. Press SITE button (side button #2) to confirm which site you are now

affiliated with. If you need to affiliate with a different site, repeat these actions until you

affiliate with an adequate site.

Appendix:

Removing the Microphone connector plate to

attach the external Speaker / Microphone 

NOTE: Always turn the radio off first

before performing any maintenance.

Insert a flat blade screwdriver into the area

between the bottom of the cover and the slot

below the connector. Hold the top of the

cover with your thumb while you pry the

bottom of the cover away from the radio with

the screwdriver. Ensure you put the cover

somewhere where you can find it!

Remember - your radio is your lifeline. Know it well!

Motorola XTS 5000 Portable Page

23Mar10