Motorola GTX Instrukcja serwisowa - Strona 21

Przeglądaj online lub pobierz pdf Instrukcja serwisowa dla Przenośne radio Motorola GTX. Motorola GTX 30 stron. 900mhz two way mobile radio
Również dla Motorola GTX: Podręcznik użytkownika (49 strony), Podręcznik użytkownika (36 strony), Instrukcja instalacji (19 strony), Podręcznik użytkownika (25 strony)

GTX/GTX LTR/LTS 2000 Portable Radios Service Manual

Relabeling

The repair facility shall have a method by which the replacement of FMRC Approval labels are controlled to ensure that any

relabeling is limited to units that were originally shipped from the Manufacturer with an FM Approval label in place. FMRC

Approval labels shall not be stocked by the repair facility. An FMRC Approval label shall be ordered from the original manu-

facturer as needed to repair a speciﬁc unit. Replacement labels may be obtained and applied by the repair facility providing

satisfactory evidence that the unit being relabeled was originally an FMRC Approved unit. Veriﬁcation may include, but is not

limited to: a unit with a damaged Approval label, a unit with a defective housing displaying an Approval label, or a customer

invoice indicating the serial number of the unit and purchase of an FMRC Approved model.

The communications equipment package that Motorola submits to FMRC for testing and approval is tested as a system that

consists of the communications unit itself and the battery, antenna and other options or accessories that make up the rest of the

package to be approved. This approved package must be strictly observed and there must be no substitution of items, even if the

substitute you wanted to consider appears as an approved accessory elsewhere in the Guide for some other communications

equipment unit. Approved conﬁgurations are listed by FMRC Approved Product in the annual Approval Guide published by

FMRC. That guide, and the Approval Standard Class Number 3605 document, can be ordered from the following address.

Training Resource Center, Publications-Order Processing Dept.

Factory Mutual Engineering and Research

1151 Boston-Providence Turnpike

PO Box 9102

Norwood, MA, 02062

Telephone: (617) 762-4300

When planning the installation of communication equipment in a vehicle with one or more air bags, proceed as follows:

•

Installation of vehicle equipment should be performed by a professional installer/technician qualiﬁed in the

requirements for such installations. An air bag's size, shape and deployment area can vary by vehicle make,

model and front compartment conﬁguration (e.g., bench seat vs. bucket seats).

•

Contact the vehicle manufacturer's corporate headquarters, if necessary, for speciﬁc air bag information for the

vehicle make, model and front compartment conﬁguration involved in your communication equipment instal-

lation.

February 1997

Vehicles equipped with air bags.

An air bag inﬂates with great force. DO NOT place objects, including

communication equipment, in the area over the air bag or in the air bag

deployment area. If the communication equipment is improperly installed and

the air bag inﬂates, this could cause serious injury.

68P02948C90-O

Foreword

Vehicles Equipped with Air Bags

xix