Motorola GTX Instrukcja serwisowa - Strona 26

Przeglądaj online lub pobierz pdf Instrukcja serwisowa dla Przenośne radio Motorola GTX. Motorola GTX 30 stron. 900mhz two way mobile radio
Również dla Motorola GTX: Podręcznik użytkownika (49 strony), Podręcznik użytkownika (36 strony), Instrukcja instalacji (19 strony), Podręcznik użytkownika (25 strony)

Radio Disassembly/Assembly

Radio Reassembly

4. Fold the LCD flexible circuit (Figure 1-11).

Make sure the LCD flexible circuit is outside.

5. Place the front housing shield into the front

housing using the four slots on the front

housing wall as the guide (Figure 1-10).

Figure 1-10. Place Front Housing Shield

Into Front Housing

6. Press down the shield at the four tabs until

tabs lock into the front housing catches.

7. Slide in the lightpipe (Figure 1-11).

LCD flexible

circuit

Figure 1-11. Slide In The Lightpipe

Chassis Reassembly

1. Place chassis on a flat surface with the battery

rails downward.

2. Insert the flexible circuit tail end (marked "RF"

into the ZIF connector on the RF board and

lock the connector by engaging the latch

(Figure 1-12).

3. Insert main board into chassis using alignment

pins as a guide (Figure 1-12).

4. Place front shield on main board using tabs as

a guide (Figure 1-12).

5. Press down on front shield until chassis, main

board, and front shield are seated tightly

together.

1-4

GTX/GTX LTR/LTS 2000 Portable Radios Service Manual

Figure 1-12. Align Pins

Hook locking clips first to the chassis tab, then

push clips over on shield with thumb until

clips lock into front shield holes (Figure 1-13).

Figure 1-13.

Replace chassis gasket (Figure 1-14).

Figure 1-14. Replace Gasket

68P02948C90-O

Reinsert Locking Clips

February 1997