Motorola GTX Instrukcja instalacji - Strona 12

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Przenośne radio Motorola GTX. Motorola GTX 19 stron. 900mhz two way mobile radio
Również dla Motorola GTX: Podręcznik użytkownika (49 strony), Instrukcja serwisowa (30 strony), Podręcznik użytkownika (36 strony), Podręcznik użytkownika (25 strony)

Installation

Starting The Installation

Mounting Trunnion Installation

(12 W & 15 W)

Select the location to mount your radio - either

on the transmission hump or under the dash-

board. If the trunnion is to be mounted on the

transmission hump ensure that the transmis-

sion housing is not affected.

Using the trunnion mounting bracket as a

template, mark the positions of the holes on

the mounting surface. Use the innermost three

holes for a curved mounting surface, such as

the transmission hump, and the four outer-

most holes for a ﬂat surface, such as under the

dash.

Center punch the spots you have marked and

drill a 5/32" (4 mm) hole at each location.

Secure the trunnion mounting bracket to the

surface with three or four 10-16x3/4" (20 mm)

screws that are provided.

Place the radio in the trunnion mounting

bracket and secure it with the two M5 thumb

screws provided.

Mount the antenna using the instructions pro-

vided with the antenna kit. Run the coaxial

cable to the radio mounting location. Unless

speciﬁed otherwise in the antenna instruc-

tions, cut off the access cable and install the

cable connector.

2-4

Figure 2-5. 30 W & 35 W Transmission Hump Mounting

6880907Z66-O

GTX Mobile Radio Installation Manual

GTX

Microphone

Connector

Figure 2-6. 12 W & 15 W Radio

Being Placed onto a Trunnion

June, 2000