Motorola GTX LTR Instrukcja serwisowa - Strona 25

Przeglądaj online lub pobierz pdf Instrukcja serwisowa dla Przenośne radio Motorola GTX LTR. Motorola GTX LTR 30 stron. Motorola portable radios service manual

Drukuj stronę
Motorola GTX LTR Instrukcja serwisowa
GTX/GTX LTR/LTS 2000 Portable Radios Service Manual
Chassis
Gasket
Main board
Shield
Figure 1-6. Separate Main Board From Chassis
6. Separate the flexible circuit tail by undoing the
ZIF connector latch (Figure 1-7).
Figure 1-7. Separate Flexible Circuit Tail

Front Housing Board Removal

1. Place the front housing assembly with the
front facing down on a padded flat surface.
This is to avoid the lens from being scratched.
2. Remove the front housing shield using
tweezers or sharp end screwdriver by undoing
the four side catches (Figure 1-8).
February 1997
Locking clips

Radio Reassembly

Front Housing Reassembly

68P02948C90-O
Figure 1-8. Remove Front Housing Shield
3. .Separate the front housing board from the
front housing.
1. Place the front housing on a cushioned flat
surface with the front facing down.
2. Place the keypad into the front housing
(Figure 1-9).
3. Place the board on the keypad in the housing
(Figure 1-9).
Figure 1-9. Place Keypad Into Front Housing
Radio
Disassembly/Assembly
Radio Reassembly
1-3