Motorola radius P110 Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przenośne radio Motorola radius P110. Motorola radius P110 39 stron.

Alert Tone Indicators

Power-Up

Each time the radio is turned on, a microcomputer and syn-

thesizer self-test occurs. A high pitched alert tone is gener-

ated for approximately 1/8 second to indicate that the

microcomputer and synthesizer are functioning properly. A

second low pitched tone is generated if the start-up test is

not successful.

Transmit on Blank or Receive-

Only Channels

Pressing the PTT button while

tuned to a blank or "receive-

only" channel causes an alert

tone. The tone continues as

long as the PTT button is

depressed. The radio transmit-

ter is not enabled.

Transmit Inhibition Busy Channel with Busy Channel

Lockout

Pressing the PTT button during a "busy channel" condition

(other than your PL/DPL group) generates a continuous

busy tone that lasts as long as the button is depressed.

Time-Out Timer

The time-out timer limits the

amount of transmission time

to a preset length (off, 30 or

60 seconds). At the end of

this time an alert tone indi-

cates that your transmission

has been cut off. The alert

will continue as long as the

PTT switch is depressed.

6880904Z68-O

P110 16-Channel Portable Radios

May, 1997