Motorola H12 - MOTOPURE H12 - Headset Skrócona instrukcja obsługi - Strona 2
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Zestawy słuchawkowe Motorola H12 - MOTOPURE H12 - Headset. Motorola H12 - MOTOPURE H12 - Headset 2 stron. Universal bluetooth headset
Również dla Motorola H12 - MOTOPURE H12 - Headset: Skrócona instrukcja obsługi (8 strony), Podręcznik użytkownika (15 strony), Podręcznik (16 strony), Skrócona instrukcja obsługi (4 strony)
Drukuj stronę
Features and
TURNING H12
ON AND OFF
Functions Guide
To turn ON your H12, slide the Power
switch towards the power symbol, as
shown below. The indicator light first flashes
blue for several seconds, then:
flashes blue (if paired and connected with
●
another device).
becomes steadily blue (if ready to be
●
paired).
To turn OFF your H12, slide the Power
switch off. The indicator light will turn off.
IMPORTANT:
Be sure to first follow the
Quick Start Guide
on the reverse side
of this guide
to complete initial setup
of your H12.
Power
Switch
MAKING CALLS
European Union Directives
Conformance Statement
Function
Hereby, Motorola declares that this
Receive a call
product is in compliance with:
Mute or unmute a call
• The essential requirements and
other relevant provisions of Directive
1999/5/EC.
Reject a call
• All other relevant EU Directives.
End a call
Product
Product
Redial last call
Approval
Approval
Number
Number
The above gives an example of a typical Product
Approval Number.
Make a voice dial call
You can view your product's Declaration of Conformity
(DoC) to Directive 1999/5/EC (to R&TTE Directive) at
www.motorola.com/rtte. To find your DoC, enter the
product Approval Number from your product's label in
the "Search" bar on the web site.
Note: Your H12 supports both Handsfree and Headset
Profiles. Accessing call functions depends upon which
profile your phone supports. See your phone's user's guide
for more information.
EAR CUSHIONS AND YOUR HEADSET
Your H12 headset is supplied with multiple ear
When fitting an oval-shaped ear cushion on
cushions. Your headset's performance is greatly
your headset, be sure the cushion is oriented,
dependent upon achieving a good fit on your
as shown below (pointing towards the
ear. Therefore, we recommend trying all the
microphone).
supplied ear cushions with your headset.
The ear cushion is fitted onto the end of your
headset's earpiece speaker like shown, and
placed onto your ear when using your headset.
Indicator
Light
MAKING CALLS
CONTINUED
Action
Function
Action
Tap the Call button
Answer a second
Press and hold Call
incoming call
button
Tap both Volume
buttons
End an active call and
Tap the Call button
Press and hold a
resume a call on hold
Volume button until
Reject a second
Press and hold either
you hear two
incoming call
Volume button until
descending tones
you hear an audio
Tap the Call button
tone
Press and hold the
Note: Some features are phone/network dependent.
Call button until you
hear two ascending
tones
Tap the Call button
and speak the
name after the tone
WEARING THE
HEADSET
To wear your headset, flex the earhook and
loop it over your ear, as shown.
Be sure to position the ear cushion into your
ear canal for optimal audio performance and
comfort.
INDICATOR LIGHT
INDICATOR LIGHT
With the Charger Plugged In
With No Charger Plugged In
Headset Indicator
Headset Status
Headset Indicator
Red
Charging (battery
Off
level less than 80%
Three blue flashes
charge)
Steady blue
Yellow
Charging (battery
level more than 80%
Rapid blue/purple flashes Connection successful
charge)
Quick blue flash
Green
Charging complete
Slow blue pulse
None
Not charging*
Slow blue flash
Slow red flash
When Checking Battery Level
Headset Indicator
Available Talk Time
Slow purple pulse
Green
Up to 5.5 hours
Quick red flash
Yellow
30 minutes to 5 hours
Note: After 20 minutes on a call or of inactivity, the light stops
Red
Less than 30 minutes
flashing to conserve power, but the headset remains on.
Note: To disable the indicator light, slide Power switch off, then
press and hold both Volume buttons AND slide Power switch
*See charging guidelines in Additional Safety Information on
on (to turn headset on).
reverse side, and remove the charger from the charging case or
desktop stand and plug in again.
CHANGING FOR USE
ON OTHER EAR
You can wear your H12 headset on your left or
right ear. The headset comes ready for the right
ear. To change the headset for the left ear:
1
Gently lift and pull the
top of the earhook up
and off speaker stem, as
shown.
2
Flip the headset over.
3
Attach the earhook to
the speaker stem, as
shown.
AUDIO TONES
Audio Tone
Headset Status
Headset Status
Ring tone
Incoming call
Power off
Single high tone
Phone network not
Powering on/off
available
Pairing mode
High to low tone
End call
Single high tone when
Volume at minimum
pressing volume button
or maximum
Incoming/outgoing call
during a call
Connected (on a call)
Ascending tone
Mute enabled
Standby (not on a call)
Low tone
Mute reminder
Idle (not connected
(repeated every
to phone)
15 seconds)
Connected call muted
Descending tone
Mute disabled
Low battery
Low to high tone
Connection
confirmation/voice
activation
No audio indications;
Out of range
deteriorating quality
Two tones
Low battery
repeated every 30 sec.
CHECKING
BATTERY LEVEL
While turned on and not on a call, you can
check your headset's battery charge level
by pressing and holding both Volume
buttons.
Note: This feature does not work when headset is in
pairing mode.
The indicator light displays charge status
until you release the buttons. See "Indicator
Light" for details on indicator light and
charge status.