Motorola H220 Podręcznik funkcji i właściwości

Przeglądaj online lub pobierz pdf Podręcznik funkcji i właściwości dla Zestawy słuchawkowe Motorola H220. Motorola H220 32 stron. Bluetooth handsfree headset

Drukuj stronę

Features and

Functions Guide

To turn your headset on, press and hold

the Power button until the indicator light

flashes.

H220

Bluetooth®

To turn your headset off, press and hold

the Power button until the indicator light

Handsfree Headset

flashes rapidly and then turns off.

IMPORTANT:

Be sure to first follow the

Indicator

Quick Start Guide

While turned on and not on a call, you can

check your headset's battery charge level

on the reverse side

by pressing and holding both Volume

of this guide

buttons until you hear a beep (about 5

seconds) The indicator light displays charge

to complete initial setup

status for a few seconds (see "Indicator

of your H220.

Light" below for details).

European Union Directives

Function

Conformance Statement

Make a voice dial call

Hereby, Motorola declares that this

product is in compliance with:

• The essential requirements and

End a call

other relevant provisions of Directive

1999/5/EC.

Answer a call

• All other relevant EU Directives.

Ignore a call

Product

Redial last call

Approval

Number

The above gives an example of a typical Product

Approval Number.

Mute or unmute a call

You can view your product's Declaration of Conformity

(DoC) to Directive 1999/5/EC (to R&TTE Directive) at

www.motorola.com/rtte. To find your DoC, enter the

Note: Some features are phone/network dependent.

product Approval Number from your product's label in

the "Search" bar on the web site.

Note: Your H220 supports both Handsfree and Headset

Profiles. Accessing call functions depends upon which profile

your phone supports. See your phone's user's guide for more

information.

TURNING HEADSET

WEARING THE HEADSET

ON AND OFF

Your H220 headset is supplied with multiple

earbuds. The earbud is fitted onto the end of your

headset's earpiece speaker, and placed onto your

ear when using your headset as shown.

Power Button

To wear your headset, flex the earhook and

loop it over your ear as shown.

Light

MAKING CALLS

Action

Headset Indicator

Tap the Call button

and speak the

Red

name after the tone

Tap the Call button

Purple

Tap the Call button

Press and hold either

Volume button until

Blue

incoming call stops

ringing

Press and hold the

Headset Indicator

Call button for at least

2 seconds until you

Red

hear a beep

Tap both Volume

Purple

buttons

Blue

CHANGING FOR USE

ON OTHER EAR

You can wear your H220 headset on your left or

right ear. The headset comes ready for the right

ear. To change the headset for the left ear:

Gently lift and pull the top of the earhook up

and off speaker stem.

Flip the headset over.

Gently attach the earhook to the speaker

stem.

INDICATOR LIGHT

With the Charger Plugged In

With No Charger Plugged In

Headset Status

Headset Indicator

Charging (battery

Off

level less than 10%

Three blue flashes

charge)

Steady blue

Charging (battery

level more than 10%

Rapid blue/purple flashes Pairing successful

charge)

Quick blue flash

Charging complete

Slow blue pulse

Slow blue flash

When Checking Battery Level

Slow red flash

Headset Status

Battery at less than

Slow purple pulse

10% charge

Quick red flash

Battery at between

10% and 80% charge

Note: After 30 minutes on a call or of inactivity, the light stops

flashing to conserve power, but the headset remains on.

Battery at more than

80% charge

Note: To disable the indicator light, press and hold both Volume

buttons while powering on the headset.

CHANGING VOLUME

BUTTON ORIENTATION

You can also change the orientation of the

volume buttons on your headset.

Turn the headset power off.

Press and hold both the Volume button

you want to assign as the "volume up"

button and the Power button to power

on the headset. The indicator light

flashes three times in blue.

Volume Buttons

AUDIO TONES

Audio Tone

Headset Status

Ascending tone

Powering on

Power off

Descending tone

Powering off

Powering on/off

Two ascending

Pairing successful/

tones

Initiate voice dial

Pairing mode

Ring tone

Incoming call

Two short tones when

Volume at minimum

Incoming/outgoing call

pressing Volume button

or maximum

Connected (on a call)

High/low tones

Low battery

Standby (not on a call)

repeated every 60 sec.

Idle (not connected

No audio indications;

Out of range

to phone)

deteriorating quality

Connected call muted

Three ascending tones

Connected call

Low battery

Three descending tones

Ended call

Two rapid ascending

Mute enabled

tones

Two rapid descending

Mute disabled

tones