Motorola SBV5322 SURFBOARD DIGITAL VOICE MODEM - annexe 1 Instrukcja instalacji - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Modem Motorola SBV5322 SURFBOARD DIGITAL VOICE MODEM - annexe 1. Motorola SBV5322 SURFBOARD DIGITAL VOICE MODEM - annexe 1 43 stron. 4-line digital voice modem

Drukuj stronę

IMPORTANT SAFETY INSTRUCTIONS

When using your telephone equipment, basic safety precautions should always be followed
to reduce the risk of fire, electric shock, and injury to persons, including the following:
•
Read all of the instructions listed here and/or in the user manual before you operate this
device. Give particular attention to all safety precautions. Retain the instructions for
future reference.
•
This device must be installed and used in strict accordance with manufacturer's
instructions as described in the user documentation that is included with the device.
•
Comply with all warning and caution statements in the instructions. Observe all warning
and caution symbols that are affixed to this device.
•
To prevent fire or shock hazard, do not expose this device to rain or moisture. The device
must not be exposed to dripping or splashing. Do not place objects filled with liquids,
such as vases, on the device.
•
This device was qualified under test conditions that included the use of the supplied
cables between systems components. To ensure regulatory and safety compliance, use
only the provided power and interface cables and install them properly.
•
Different types of cord sets may be used for connections to the main supply circuit. Use
only a main line cord that complies with all applicable device safety requirements of the
country of use.
•
Installation of this device must be in accordance with national wiring codes and conform
to local regulations.
•
Operate this device only from the type of power source indicated on the device's
marking label. If you are not sure of the type of power supplied to your home, consult
your dealer or local power company.
•
Do not overload outlets or extension cords, as this can result in a risk of fire or electric
shock. Overloaded AC outlets, extension cords, frayed power cords, damaged or cracked
wire insulation, and broken plugs are dangerous. They may result in a shock or fire
hazard.
•
Route power supply cords so that they are not likely to be walked on or pinched by items
placed upon or against them. Pay particular attention to cords where they are attached to
plugs and convenience receptacles, and examine the point where they exit from the
device.
•
Place this device in a location that is close enough to an electrical outlet to accommodate
the length of the power cord.
iii —
SBV5322 SURFboard Digital Voice Modem