Motorola SM56 Podręcznik referencyjny poleceń At - Strona 39
Przeglądaj online lub pobierz pdf Podręcznik referencyjny poleceń At dla Modem Motorola SM56. Motorola SM56 42 stron. Software modem
Również dla Motorola SM56: Skrócona instrukcja obsługi (13 strony), Skrócona instrukcja obsługi (22 strony), Skrócona instrukcja obsługi (48 strony)
Drukuj stronę
Table 15 - Completed Data Call, with some errors and rate retrain during the call
Event Reporting
Word
Modem response line
Modem response line
Modem response line
Modem response line
DIAG <2A4D3263 20=C 22=780
24=0C80 26=79E0 >
DIAG <2A4D3263 21=D 25=1F40
27=DAC0 >
DIAG <2
A4D3263 30=00 31=03 32=01
33=01>
DIAG <2A4D3263 34=7080
35=CB20>
DIAG <2A4D3263 40=1 41=100>
DIAG <2A4D3263 42=0 43=0>
DIAG <2A4D3263 44=1 45=400>
DIAG <2A4D3263 50=2 51=2>
DIAG <2A4D3263 52=343CC 54=0>
DIAG <2A4D3263 53=7230E6
55=47>
DIAG <2A4D3263 56=29D 58=0001> 597 (decimal) frames transmitted, with 1
DIAG <2A4D3263 58=2A4B
59=0004>
DIAG <2A4D3263 60=51>
You can use the AT+VEM command to define events on which to report. The
list is encoded as a word composed of the following bits.
Note
All events are enabled by default and indicated by the underlined bit number.
A 1 in a bit-position indicates an event is reported.
A 0 in a bit-position indicates an event is not reported.
Read bits from right (Bit 0) to left (Bit 32).
Blank table entries are unsupported events
Motorola Confidential Proprietary
Description
Description
Description
Description
Transmitter: V.34 training completed;
V.34 carrier frequency = 1920; V.34
symbol rate = 3200; initial transmit rate
is 31200 bit/s
Receiver: V.90 training completed; V.90
symbol rate = 8000; initial receive rate is
56000 bit/s
No carrier loss events, 3 carrier rate rene-
gotiations attempted; 1 carrier retrain
requested; 1 carrier retrain granted
Final transmit rate is 28800 bit/s; final
receive rate is 52000 bit/s
LAPM negotiation completed; frame
size = 256
No error control timeout or link NAKs
V.42bis data compression used; dictio-
nary size = 1024
Hardware transmit and receive flow con-
trol
213964 DTE characters transmitted, w/o
underrun
7483622 DTE characters received, 71
characters lost due to receive data over-
run
frame error
10827 (decimal) frames received, with 4
frame errors
Local PC initiated hangup
-37