Dimastech Easy V3.0 Instrukcja montażu - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Sprzęt testowy Dimastech Easy V3.0. Dimastech Easy V3.0 10 stron.

ASSEMBLY DimasTech Easy V.3.0 –

PD001_16mm

For power ON or reset function, connect without

polarity yellow cable to "NO1" and other Yellow

cable to "C1", than to use the push button

integrated LED, connect the black cable to "-"

and the red cable to "+", push button integrated

LED will work with PWLED (power on LED) and

HDLED (hard disk LED), please take care of

polarity, follow "-" and "+" on motherboard

instruction.

Note: The number indicated in the brackets indicates the corresponding

identification in the table on the page No.2