Epson 1250 - Perfection Photo Flatbed Scanner Instrukcja konfiguracji

Przeglądaj online lub pobierz pdf Instrukcja konfiguracji dla Oprogramowanie Epson 1250 - Perfection Photo Flatbed Scanner. Epson 1250 - Perfection Photo Flatbed Scanner 2 stron. Color image scanner
Również dla Epson 1250 - Perfection Photo Flatbed Scanner: Podręcznik użytkownika (7 strony), Podręcznik podstawowy (48 strony), Biuletyn wsparcia produktu (34 strony), Informacje o produkcie (4 strony), Zacznij tutaj (2 strony), Biuletyn wsparcia produktu (23 strony), Podręcznik (11 strony), Biuletyn wsparcia produktu (40 strony), Specyfikacje (2 strony), Deklaracja zgodności (2 strony), Biuletyn wsparcia produktu (17 strony), Biuletyn wsparcia produktu (24 strony), Biuletyn wsparcia produktu (29 strony), Biuletyn wsparcia produktu (8 strony), Biuletyn wsparcia produktu (3 strony), Biuletyn wsparcia produktu (14 strony), Biuletyn wsparcia produktu (18 strony), Biuletyn wsparcia produktu (12 strony), Biuletyn wsparcia produktu (40 strony), Biuletyn wsparcia produktu (36 strony), Biuletyn wsparcia produktu (11 strony), Biuletyn wsparcia produktu (40 strony), Biuletyn wsparcia produktu (22 strony), Biuletyn wsparcia produktu (12 strony), Biuletyn wsparcia produktu (21 strony), Korzystanie z instrukcji (3 strony), (Angielski) Ustawienia (2 strony)

Drukuj stronę
Epson 1250 - Perfection Photo Flatbed Scanner Instrukcja konfiguracji
Unpacking
Make sure the following parts are included and not damaged. If you find any missing or damaged items, contact your EPSON dealer immediately.
scanner
scanner software CD

1. Installing the Software

Insert the scanner software CD in the CD-ROM drive and install the software BEFORE
connecting the scanner to your computer.
For Windows
1. Insert the scanner software CD in the CD-ROM drive.
2. The EPSON Installation Program dialog box appears. Select your
preferred language and click
.
3. Select Install Scanner Software, and click
.
Note:
If the EPSON Installation Program dialog box does not appear,
double-click the My Computer icon. Click the CD-ROM icon, then select
Open from the File menu. Then double-click Setup.exe.
4. Make sure all the software in the list is selected and click OK.
5. Then, follow the on-screen instructions until all the software is installed.
When a message appears informing you that installation is complete,
click OK.
This completes the scanner software installation. Next,
set up the scanner as described in "2. Setting up the
Scanner."
Read this side first!
power cord
AC adapter
The power cord is designed to match
The AC adapter is designed to match
the voltage of the country of purchase.
the voltage of the country of purchase.
For Macintosh
1. Insert the scanner software CD in the CD-ROM drive.
2. Double-click your preferred language icon in the EPSON folder.
Note:
If the EPSON folder does not appear on your desktop, double-click the
EPSON icon on your desktop.
3. Double-click the Installer icon.
4. The Installer dialog box appears. Be sure to install all the software in
the list.
5. Click Start and follow the on-screen instructions.
This completes the scanner software installation. Next,
set up the scanner as described in "2. Setting up the
Scanner."
Warnings, Cautions, and Notes
w
c
Warnings must be followed
Cautions must be observed to
carefully to avoid bodily injury.
avoid damage to your
equipment.
For the Perfection 1250 Photo
The Perfection 1250 Photo comes with the Film Adapter which is also available as an option for the Perfection 1250.
USB cable

2. Setting up the Scanner

1. Unlock and plug in the scanner
1. Slide the transportation lock to the right and connect the AC adapter as
shown below.
document cover
transportation lock
DC inlet
Note:
If you plan to use the Film Adapter, install it first.
2. Plug the other end of the power cord into an electrical outlet and make
sure the indicator light turns on in green.
c
Caution:
It is not possible to change the AC adapter's input and output
voltage. If the label on the AC adapter does not show the correct
voltage, contact your dealer. Do not plug in the power cord.
Whenever you unplug the scanner, wait at least 10 seconds
before plugging it back in. Rapidly plugging and unplugging the
scanner can damage it.
Note:
This scanner does not have a power button. It turns on when you
connect the AC adapter and then plug in the power cord.
Be sure to unplug the scanner once you have finished using it. The
scanner turns off when unplugged.
2. Connect the USB cable
1. Connect one end of the USB cable to the scanner's USB port.
USB port
2. Connect the other end of the USB cable to the USB port on your
computer.
Notes contain important information
and useful tips on the operation of your
scanner.
film holders
Film Adapter
3. The scanner is recognized automatically. For Windows users, the dialog
box appears during the recognition process.
Note for Windows 2000 users:
When you connect the scanner, the following dialog box appears. Click
Yes to continue.
4. Open the document cover and make sure the fluorescent lamp on the
carriage turns on.
carriage
(in the home position)
light
Note:
The fluorescent lamp turns off if you unplug the USB cable, and turns
on again if you connect the USB cable.
Now you are ready to use your scanner.
3. Check the installation and setup
Follow these steps to make sure the installation and setup are completed
properly, and the scanner operates correctly.
]
1. Press the
Start button on the scanner.
Start button
Photo Print button
Scan to E-mail button
Scan to Web button
2. If the EPSON Smart Panel window appears, your scanner is now set
up and ready to use.
4014161-00
x00