Epson 1640XL - Expression Graphic Arts Podręcznik - Strona 19

Connecting the Scanner to Your Computer Using the USB

Interface

Your PC must have been purchased with Windows 2000 or Windows 98 preinstalled,

and have a working USB port.

Your Macintosh computer must be running system 8.5 or later and have a built-in USB

port.

Note for Macintosh Users:

Be sure to install the scanner software before connecting the scanner to your Macintosh.

See Chapter 3, "Installing the Scanner Software for Macintosh," in your online Setup

Guide for details.

Understanding USB connections

USB Cables

USB cables enable you to connect or remove peripherals to and from your computer

easily, without having to shut down and restart the system each time a peripheral is

plugged in or unplugged. You do not have to set an ID number or a terminator.

Note:

Do not connect or disconnect USB cables when the scanner is in use.

USB cables have 2 different connectors at each end.

Type A connects to your computer.

Type B connects to your scanner.

USB hub

You can also use a USB hub, allowing you to increase the number of USB ports and

therefore connect several peripherals.

Note:

If you connect your scanner through more than one hub, your system may not work

properly. In this case, try connecting the scanner directly to the computer's USB port.

Also, your system may not work properly if you use a USB cable other than that supplied

by EPSON.

Connecting the Scanner to Your Computer