Epson 1810p - PowerLite XGA LCD Projector Podręcznik użytkownika - Strona 16

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Oprogramowanie Epson 1810p - PowerLite XGA LCD Projector. Epson 1810p - PowerLite XGA LCD Projector 27 stron. Release of emp ns connection for windows & mac upgrade from v2.50 to v2.51
Również dla Epson 1810p - PowerLite XGA LCD Projector: Podręcznik użytkownika (42 strony), Szybka konfiguracja (2 strony), Instrukcja obsługi (47 strony), Biuletyn wsparcia produktu (5 strony), Deklaracja zgodności (4 strony), Lista części (1 strony), Broszura (2 strony), Biuletyn wsparcia produktu (41 strony)

Drukuj stronę
Epson 1810p - PowerLite XGA LCD Projector Podręcznik użytkownika
PowerLite 1810p/1815p
Checking the Gateway IP Address on Windows
If you're entering IP addresses manually and need to find out
the gateway IP address (the IP address of your access point),
make sure the wireless connection to the access point is
currently active, as described in the previous section. Then
follow these steps:
1. Access your wireless network Properties window. For
example, in Windows XP click
Network and Internet Connections
Network Connections
2. Right-click the
Wireless Network Connection
select
.
Status
3. Click the
tab. The gateway's IP address is listed as
Support
shown:
Note: If you cannot identify the gateway address using this
Windows utility, use the administrator's utility software that came
with your access point.
16
PowerLite 1810p/1815p
-
Start > Control Panel >
. Then click the
icon. You see a screen similar to this:
icon and
Gateway address
Configuring the Network Settings for Macintosh
Your AirPort software is automatically configured to allow your
Mac to detect Access Point networks. Typically, you only need
to select your AirPort network name from the AirPort status
menu on the Mac menu bar. If you're having problems
connecting to the projector, follow these steps:
1. From the Apple pull-down menu, select
.
Preferences
2. Click the
Network
window.
3. Make sure Location is set to
Select
Automatic
Select
Network Port
Configurations
Then select
AirPort
4. Select
Network Port Configurations
pull-down menu.
5. Under Port Configurations, select
6. Click
Apply Now
7. Start the AirPort Admin utility. Select your base station,
then click
Configure
8. On the AirPort tab, make sure your AirPort network name
matches your projector's ESSID. If not, enter the projector's
ESSID in the AirPort Network text box and click
9. If you turned DHCP on in your projector's advanced menu,
click the Network tab and make sure the
checkbox is selected. If you need to select it, click
addresses
.
Update
3/08
System
icon. You see the Network settings
.
Automatic
in the Show
.
AirPort
. Then close the window.
.
Distribute IP
.
Update