Epson 1925W - POWERLITE Multimedia Projector Instrukcja obsługi - Strona 19

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Oprogramowanie Epson 1925W - POWERLITE Multimedia Projector. Epson 1925W - POWERLITE Multimedia Projector 47 stron. Epson powerlite 1925w projector
Również dla Epson 1925W - POWERLITE Multimedia Projector: Podręcznik szybkiej konfiguracji (4 strony), Podręcznik użytkownika (1 strony), Specyfikacje (4 strony), Instrukcje aktualizacji (4 strony), Deklaracja zgodności (4 strony), Lista części (1 strony), Broszura i specyfikacje (4 strony), Podręcznik użytkownika (25 strony), Aktualizacja instrukcji (8 strony), Podręcznik użytkownika (25 strony), Podręcznik instalacji (3 strony)

Registering and deleting projectors for monitoring

First, create the registration groups, and then register projectors into the

groups that have been created.

Procedure

Right-click in Grouping view and select "New" - "Group".

The following window will be displayed.

Make the necessary settings while referring to the table below.

If Detail list view is displayed, select New - Group from the Edit

menu.

Group name

Enter the name of the group to be displayed in

Grouping view or Detail list view.

Up to a maximum of 32 bytes can be entered. A

space cannot be used as the first character.

Display icon

Select the icon(s) to be displayed in Grouping

view or Detail list view.

Parent group

This selects the parent group. If no groups have

been created, this cannot be selected.

Monitor

Select this to monitor all projectors that have

been registered in the group. If this is not

selected, the settings made when the individual

projectors were registered will be used.

It cannot be set when creating a new group.

You can also carry out this operation by selecting New - Group from the

Edit menu.

When the setup is complete, click "Register" to start the

registration. When the message is displayed, click "OK".

The icon(s) of the projector(s) you registered will be displayed in

Grouping view or Detail list view.

Right-click the projector icon(s) to register to the group you

have created in Grouping view or Detail list view, and select

"Edit".

You can also carry out this operation by selecting Edit in the Edit menu.

In the Edit projector window, select the group name to use

for registering in Parent group and then click "Change".

The status of the group registration will be displayed as an icon in

Grouping view or Detail list view.

The registration details can also be checked using Projector list in the View

menu.