Epson 2000P - Stylus Photo Color Inkjet Printer Instrukcja konfiguracji - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja konfiguracji dla Oprogramowanie Epson 2000P - Stylus Photo Color Inkjet Printer. Epson 2000P - Stylus Photo Color Inkjet Printer 17 stron. Product support bulletin(s)
Również dla Epson 2000P - Stylus Photo Color Inkjet Printer: Wymiana wkładów (2 strony), Biuletyn wsparcia produktu (6 strony), Biuletyn wsparcia produktu (1 strony), Specyfikacje (1 strony), Informacje o produkcie (13 strony), Podręcznik użytkownika (12 strony), Biuletyn wsparcia produktu (3 strony), Biuletyn wsparcia produktu (2 strony), Biuletyn wsparcia produktu (4 strony), Biuletyn wsparcia produktu (7 strony), Skrócona instrukcja obsługi (2 strony), Instrukcja instalacji (8 strony)

Installing the Ink Cartridges

This printer uses ink cartridges equipped with IC chips. The IC chip

accurately monitors the amount of ink used by each cartridge, so even

if a cartridge is removed and inserted again, all of its ink can be used.

However, a small amount of black and color ink is consumed each time

the cartridge is inserted because the printer automatically checks

reliability.

Be sure to use the ink cartridges packed with your printer the first time

you install ink cartridges.

Using the Setup utility for Windows

If you have Windows 95, 98, or NT 4.0 installed on your computer, the

Setup utility should open automatically when the printer software

installation is complete.

Macintosh users, please refer to the following section.

Using the printer's control panel for PCs and Macintosh

If you are a Macintosh user, or are unable to access the Setup utility in

Windows, use the printer's control panel to install the ink cartridges.

Note:

Do not open the ink cartridge packages until just before you install them. If you

leave a cartridge unpacked for a long time before using it, normal printing may

not be possible.

Install the ink cartridges as follows:

1. Lower the output tray, then open the printer cover.