Epson 755c - PowerLite XGA LCD Projector Instrukcja obsługi - Strona 15

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Oprogramowanie Epson 755c - PowerLite XGA LCD Projector. Epson 755c - PowerLite XGA LCD Projector 26 stron. Release of check tool for network projectors v1.00 for windows
Również dla Epson 755c - PowerLite XGA LCD Projector: Podręcznik użytkownika (42 strony), Instrukcja obsługi (36 strony), Arkusz specyfikacji (2 strony), Instrukcja obsługi (47 strony), Biuletyn wsparcia produktu (30 strony), Elementy wymieniane przez użytkownika (1 strony), Szybka konfiguracja (2 strony), Instrukcja instalacji (19 strony), Podręcznik użytkownika (1 strony), Podręcznik funkcji (5 strony), Biuletyn wsparcia produktu (25 strony), Biuletyn wsparcia produktu (38 strony), Biuletyn wsparcia produktu (12 strony), Biuletyn wsparcia produktu (42 strony), Biuletyn wsparcia produktu (22 strony), Biuletyn wsparcia produktu (28 strony), Biuletyn wsparcia produktu (41 strony), Biuletyn wsparcia produktu (34 strony), Biuletyn wsparcia produktu (38 strony), Biuletyn wsparcia produktu (28 strony), Biuletyn wsparcia produktu (15 strony), Biuletyn wsparcia produktu (22 strony)

Drukuj stronę

Epson 755c - PowerLite XGA LCD Projector Instrukcja obsługi

Configuring the Network Settings for Macintosh

Your AirPort software is automatically configured to allow your

Macintosh to detect both computer-to-computer (ad hoc) and

access point networks.

Typically you only need to select your projector's ESSID (ad

hoc) or your AirPort network name (access point) on the

Macintosh menu bar. If you're having problems connecting to

the projector, follow these steps:

1. From the Apple pull-down menu, select

and click the

Preferences

Network settings menu.

Select Automatic

Select Network Port

Configurations

then select AirPort

2. Make sure Location is set to

in the Show pull-down menu.

Port Configurations

3. Under Port Configurations, select

4. Click

and close the window.

Apply Now

5. Ad hoc mode: Go to step 8.

Access point mode: Start the AirPort Admin utility. Select

your base station, then click

6. On the AirPort tab, make sure your AirPort network name

matches your projector's ESSID. If not, enter the projector's

ESSID in the AirPort Network text box and click

7. If you turned DHCP in your projector's Advanced menu,

click the

tab and make sure the

Network

checkbox is selected. If you need to select it, click

addresses

Update

System

icon. You see the

Network

and select

Automatic

Network

AirPort

Configure

Update

Distribute IP

Epson PowerLite 755c/765c Projector

8. Click the AirPort icon on the menu bar at the top of the

Macintosh desktop. You see the AirPort status menu:

Check to make sure AirPort is turned on.

9. Select your projector's ESSID (ad hoc) or the name of your

AirPort network (access point).

Projecting Wirelessly

Once you've started EasyMP and set up your projector and

computer in either ad hoc mode or access point mode, follow

the steps below to start NS Connection and project wirelessly.

Note:

You must have installed EMP NS Connection from your projector

CD-ROM. See the User's Guide for installation instructions.

1. Make sure you've inserted the Epson 802.11g/b card in the

projector's card slot (see page 11).

2. Windows: Select

Start menu.

Macintosh OS X: Double-click the

icon in your Applications folder.

The first time you start NS Connection, you see a dialog box

asking you to select your network. Select the name

for your computer's wireless network adapter card and

click

8/05

Epson PowerLite 755c/765c Projector

from the Windows

EMP NS Connection