Epson 755c - PowerLite XGA LCD Projector Biuletyn wsparcia produktu - Strona 26

Przeglądaj online lub pobierz pdf Biuletyn wsparcia produktu dla Oprogramowanie Epson 755c - PowerLite XGA LCD Projector. Epson 755c - PowerLite XGA LCD Projector 30 stron. Release of check tool for network projectors v1.00 for windows
Również dla Epson 755c - PowerLite XGA LCD Projector: Podręcznik użytkownika (42 strony), Instrukcja obsługi (36 strony), Arkusz specyfikacji (2 strony), Instrukcja obsługi (26 strony), Instrukcja obsługi (47 strony), Elementy wymieniane przez użytkownika (1 strony), Szybka konfiguracja (2 strony), Instrukcja instalacji (19 strony), Podręcznik użytkownika (1 strony), Podręcznik funkcji (5 strony), Biuletyn wsparcia produktu (25 strony), Biuletyn wsparcia produktu (38 strony), Biuletyn wsparcia produktu (12 strony), Biuletyn wsparcia produktu (42 strony), Biuletyn wsparcia produktu (22 strony), Biuletyn wsparcia produktu (28 strony), Biuletyn wsparcia produktu (41 strony), Biuletyn wsparcia produktu (34 strony), Biuletyn wsparcia produktu (38 strony), Biuletyn wsparcia produktu (28 strony), Biuletyn wsparcia produktu (15 strony), Biuletyn wsparcia produktu (22 strony)

EPSON

08/05/2003

Date:

PSB.2003.08.001

PSB #:

N/A

Reference:

Product(s):

PowerLite 735c Multimedia Projector

Advanced Menu "Standby Mode" settings and Remote Access

Subject:

This bulletin was created to inform you of the "Standby Mode" settings, under the Advanced

Menu selection for the PowerLite 735c MultiMedia Projector.

Description:

The "Standby Mode" setting information was not included in the User Manual that is bundled

with the projector, and is also not included in the User Manual posted on the Epson Website.

However, when accessing the menu system on the projector using the remote control, the

Advanced Menu does include the "Standby Mode" selection.

When the PowerLite-735c is in standby mode, customers who attempt to attach wirelessly to

the projector with either the EMP Monitor Utility, or through their internet browser (Internet

Explorer or Netscape) using the TCP/IP address of the projector, cannot detect or attach to it.

Solution:

By default, the Network Mode in the Advanced Menu under the Standby Mode section is

turned off. In the OFF setting, there is no power to the PC Card slot of the projector. The

Network Mode setting needs to be set to ON and the projector re-powered for this setting to be

activated. After this is done the PC Card slot is then live when the projector is in standby

mode, and can be controlled with EMP Monitor or an internet browser.

When an internet browser is being used to access the projector over TCP/IP, a login screen

appears requesting a login name and password. By default there is no login name or

password set; leave the fields blank and click OK.

Please see the screen shots on the following pages for reference.

RODUCT

UPPORT

ULLETIN

Page 1 of 4

Originator: DS

Authorization:

Total Pages: 4