Epson 9800 - Stylus Pro Color Inkjet Printer Skrócona instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Oprogramowanie Epson 9800 - Stylus Pro Color Inkjet Printer. Epson 9800 - Stylus Pro Color Inkjet Printer 12 stron. Stylus pro 800 series
Również dla Epson 9800 - Stylus Pro Color Inkjet Printer: Instrukcja rozpakowywania i konfiguracji (27 strony), Broszura i specyfikacje (8 strony), Podręcznik dla początkujących (10 strony), Podręcznik użytkownika (11 strony), Ograniczona gwarancja (12 strony), Broszura i specyfikacje (8 strony), Broszura i specyfikacje (6 strony), Broszura i specyfikacje (16 strony), Arkusz informacyjny (4 strony)

Drukuj stronę
Epson 9800 - Stylus Pro Color Inkjet Printer Skrócona instrukcja obsługi
Checking Ink Levels and Replacing Ink Cartridges
Checking Ink Levels and Replacing Ink Cartridges
Before you begin a large print job, you should check your
ink levels. If one of your cartridges is low, you can replace
it before you start. Or you can wait until the ink runs
out, replace the cartridge, and then continue the job.
Checking Ink and Maintenance Tank
Levels
The easiest way to check ink levels is from the control
panel. The numbers below the ink cartridge icons
correspond to the 8 cartridge slots in the printer. The
larger icon or icons on the right show the status of the
maintenance tank(s). The icons show the percentage of
ink or maintenance tank capacity remaining.
100-81%
20% or less
80-61%
Ink low
60-41%
Ink out
40-21%
Cartridge error or no cartridge

Replacing Ink Cartridges

When the ink light flashes, and INK LOW is displayed
on the LCD, one or more cartridges are nearly empty.
Check the LCD to see which cartridge is low, and make
sure you have the correct replacement cartridge.
You can install any combination of 110 ml and 220 ml
cartridges.
Epson UltraChrome K3
Slot no.
Ink color
1
Light Light Black T562900 T563900
2
Light Magenta
3
Light Cyan
4
Light Black
5
Photo Black
Matte Black
6
Cyan
7
Magenta
8
Yellow
ink cartridges
TM
110 ml
220 ml
T562600 T563600
T562500 T563500
T562700 T563700
T562100 T563100
T566800 T567800
T562200 T563200
T562300 T563300
T562400 T563400
When one of the icons shows empty and INK OUT is
displayed on the LCD panel, the cartridge is empty. To
replace the cartridge, first make sure the printer is on.
1
Press the ink compartment cover to open it.
2
Raise the ink lever to the unlocked position.
3
Remove the empty ink cartridge from the printer.
Warning:
Do not shake the empty cartridge, or ink
may leak. If ink gets on your hands, wash them
thoroughly with soap and water. If ink gets in your
eyes, flush them immediately with water.
4
Make sure the replacement cartridge is the correct
color, and remove it from its package.
Gently shake the cartridge before installing it.
5
Continue