Epson EasyMP Network Projection Instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Oprogramowanie Epson EasyMP Network Projection. Epson EasyMP Network Projection 50 stron. Multimedia projector
Również dla Epson EasyMP Network Projection: Instrukcja obsługi (47 strony), Instrukcje aktualizacji (4 strony), Instrukcja obsługi (50 strony), Instrukcja obsługi (50 strony), Instrukcja obsługi (47 strony), Instrukcja obsługi (40 strony), Instrukcja obsługi (48 strony), Instrukcja obsługi (47 strony)

Two Connection Modes

Preparing to Connect

Follow the steps below to connect the computer and the projector via a

network using EasyMP Network Projection.

Install EasyMP Network Projection on the computer to be

connected.

s "Installing"

p.7

Make network settings on the computer and put it into

network connection status.

See the documentation supplied with your computer, LAN adapter,

or AirMac card for more details on network settings.

When the computer you are using is normally connected to the network,

you do not need to make network settings on the computer.

Make network settings on the projector and put it into

network connection status.

You can make network settings from the projector's Network

menu.

See your projector User's Guide for details.

Press the LAN button on the remote control.

The LAN standby screen is displayed.

If there is no signal for the current input source, it automatically

switches to the LAN source. If it does not automatically switch to

the LAN source, press the LAN button.

Start EasyMP Network Projection on the computer and

connect with the projector.

s "Connecting to a Projector on a Network and Projecting"

If a connection error occurs, a number indicating the type of error is

displayed as follows.

Event ID: 04xx

See your projector User's Guide for details on Event ID.

p.11