Epson EasyMP Network Projection Instrukcja obsługi - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Oprogramowanie Epson EasyMP Network Projection. Epson EasyMP Network Projection 40 stron. Multimedia projector
Również dla Epson EasyMP Network Projection: Instrukcja obsługi (47 strony), Instrukcje aktualizacji (4 strony), Instrukcja obsługi (50 strony), Instrukcja obsługi (50 strony), Instrukcja obsługi (47 strony), Instrukcja obsługi (50 strony), Instrukcja obsługi (48 strony), Instrukcja obsługi (47 strony)

Operating environment

Procedure

Turn the computer on.

To prevent problems from occurring during the installation, we

recommend that you terminate all resident applications that can

be ended.

Load the supplied Projector Software CD-ROM in your

computer.

The installer automatically starts up.

From here, continue with the installation by following the

on-screen messages.

The software name has been changed.

Before: EMP Monitor _ After: EasyMP Monitor

If you are already using EMP Monitor, you can replace with this

software. To update software, uninstall EMP Monitor first, and

then install this software.

Limitations imposed by a Windows Vista

environment

When using EasyMP Monitor under Windows Vista, note the following

limitations.

• You must have administrator authority in order to use Register at

startup on the Environment setup screen of EasyMP Monitor.

"Monitoring using the system tray"

p.24

• Even after EasyMP Monitor has been uninstalled, the settings and log

information will remain on the hard disk. If this information is no

longer required, you may delete the EasyMP Monitor Ver.4.31 folder.

Provided the default settings were used at installation, this folder can

be found at: "C:\Users\(User Name)\AppData\Local\VirtualStore

\Program Files\EPSON Projector\EasyMP Monitor Ver.4.31"

Check the following points before starting up EasyMP Monitor.

• EasyMP Monitor must be installed on the computer to be used for

monitoring and control.

• The computer and the projectors must be connected to the network.

• If using Windows 2000/Windows NT4.0/Windows XP/Windows Vista,

the computer must be started up in Administrator mode.

• Depending on the projector model, a commercially-available serial

TCP/IP conversion adapter and a connection cable are required in

order to use EasyMP Monitor.

Mode"

Make the settings for the serial

connecting to the projector.

Projector's User's Guide "Standby

TCP/IP conversion adapter before