Epson EasyMP Network Projection Instrukcja obsługi - Strona 14

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Oprogramowanie Epson EasyMP Network Projection. Epson EasyMP Network Projection 47 stron. Multimedia projector
Również dla Epson EasyMP Network Projection: Instrukcja obsługi (47 strony), Instrukcje aktualizacji (4 strony), Instrukcja obsługi (50 strony), Instrukcja obsługi (50 strony), Instrukcja obsługi (47 strony), Instrukcja obsługi (50 strony), Instrukcja obsługi (40 strony), Instrukcja obsługi (48 strony)

Drukuj stronę
Epson EasyMP Network Projection Instrukcja obsługi
Connecting to a Projector on a Network and Projecting

Using the Toolbar

The toolbar is displayed on the computer screen after EasyMP Network
Projection starts and a connection is made with the projector. You can use
this toolbar to operate and make settings for the projector.
Select target projector
Click to limit the projector operated from the toolbar when projecting
from multiple projectors using the distribution function or Multi-
screen display. The indication below the icon shows the projectors that
can be controlled.
ALL indicates that all of the connected projectors can be controlled.
For example, when "1, 3" is displayed, projectors No. 1 and No. 3 can be
controlled.
Click
to display the following screen.
A
Select the projector to be controlled.
B
Indicates the No. of an allocated projector. This No. appears under
the icon to indicate the No. of the projector that you can control
from the toolbar.
C
Indicates the status of the projector.
Stop
Stops projection while connected to the projector. A black screen is
projected while stopped.
Show
Releases Stop or Pause.
Pause
Pauses projected images while connecting to the projector.
Presentation Mode
Each time this is clicked, Presentation Mode switches between enabled/
disabled.
s "Projecting Only a PowerPoint Slide Show (Presentation Mode)"
p.22
Projector control
While the projector is connected to the network, the projector's A/V
Mute, Switch PC source and Switch video source functions can be
controlled from both the remote control and the projector's control
panel.
Click
to display the following toolbar.
A/V Mute
Turns the video and audio on or off.
Switch PC source
Changes to images from the port where the signal is
being input.
Switch video source
Changes to images from the video input port.
Screen Preview
14