Epson EasyMP Network Projection Instrukcja obsługi - Strona 25

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Oprogramowanie Epson EasyMP Network Projection. Epson EasyMP Network Projection 47 stron. Multimedia projector
Również dla Epson EasyMP Network Projection: Instrukcja obsługi (47 strony), Instrukcje aktualizacji (4 strony), Instrukcja obsługi (50 strony), Instrukcja obsługi (50 strony), Instrukcja obsługi (47 strony), Instrukcja obsługi (50 strony), Instrukcja obsługi (40 strony), Instrukcja obsługi (48 strony)

Using Multi-Screen Display

• Those users who have enabled virtual displays when installing EasyMP

Network Projection.

• For Mac OS users.

Click Start, select Programs (or All Programs), EPSON Projector,

EasyMP Network Projection, and then click Add-Remove EPSON

Virtual Display.

The Add-Remove EPSON Virtual Display screen is displayed.

Select the virtual display you want to use.

Up to four monitors can be added. In this example, a single virtual

display is to be used. When setting multiple virtual displays, select as

many displays as necessary.

Any one of the displays can be selected.

Click OK.

When you click OK, the drivers for the virtual display are enabled.

At this point, it is normal for the display to flicker. Wait for the

Add-Remove EPSON Virtual Display screen to close.

Adjusting the Virtual Display

After starting EasyMP Network Projection, the procedure for setting up the

virtual displays differs for Windows and Mac OS. The procedures are

explained separately below.

Check the following points before starting EasyMP Network Projection.

If the following points are not set correctly, Multi-screen display

cannot be used.

• The SSID for the computer and each projector must be the same.

(For Quick Connection Mode)

• The wireless LAN system for the computer and each projector must

be the same.

You can modify the SSID and wireless LAN system for the projector

from the projector's Network menu.

See the following manual for details.

User's Guide "Wireless LAN menu"

For Windows

Click Start, select Programs (or All Programs), EPSON Projector,

EasyMP Network Projection, and then click EasyMP Network

Projection V2.XX to start EasyMP Network Projection.

Select Quick Connection Mode or Advanced Connection Mode,

and then click OK.

Select the Use multi-display check box.