Epson EasyMP Network Updater Instrukcja obsługi - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Oprogramowanie Epson EasyMP Network Updater. Epson EasyMP Network Updater 47 stron. Operation guide - easymp network updater
Drukuj stronę
4. Turn on the projector.
5. Press the Menu button on the remote control or the control panel, select the Network menu, and
then select Network Configuration.
6. Select Wired LAN.
A screen like one of the following is displayed.
7. Select IP settings as necessary.
• DHCP is available: Turn on the DHCP setting.
• DHCP is not available: Turn off the DHCP setting and enter the projector's IP Address, Subnet
Mask, and Gateway Address values.
8. When you have finished making settings, select Setup Complete or Complete, and then follow the
on-screen instructions.
Parent topic:
Making a Projector List
You can make a list of projectors for which you want to update the firmware using EasyMP Network
Updater.
Projector List
Editing a Projector List
Parent topic:
Selecting Projector Network Settings
Setting Up EasyMP Network Updater for the First Time
9