Epson EMP MONITOR OPERATION V4.30 Podręcznik użytkownika - Strona 12
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Oprogramowanie Epson EMP MONITOR OPERATION V4.30. Epson EMP MONITOR OPERATION V4.30 42 stron. Emp monitor for projectors
Również dla Epson EMP MONITOR OPERATION V4.30: Instrukcja obsługi (37 strony)
Drukuj stronę
Registering and deleting projectors for monitoring
Procedures for registration
Procedure
A
Select the projector(s) to be registered from the displayed
list, and then click "Edit".
The following window will be displayed.
Make the necessary settings while referring to the following table.
Display name
Enter the name of the projector(s) to be displayed in
Grouping view or Detail list view.
Up to a maximum of 32 bytes can be entered. A space
cannot be used as the first character.
Display icon
Select the icon(s) to be displayed in Grouping view or
Detail list view.
Parent group
Select when registering a projector in a group.
If no groups have been created, this cannot be selected.
s "Registering several projectors to a monitoring
group all at once"
Projector
This shows the name that has been registered on the
name
projector.
IP address
This shows the IP address for the registered projector.
Use Serial
This cannot be selected when registering projectors
TCP/IP
using automatic search.
conversion
adaptor.
Port Number
This cannot be selected when registering projectors
using automatic search.
Monitor
If a Monitor Password has been set for the projector, be
Password
sure to enter the Monitor Password that has been set. If
the correct password is not entered at this time, it will
not be possible to monitor and control the projector
even though it is registered.
Description
You can enter some kind of memo about the projector.
The details you enter here will be displayed at the
projector properties.
Up to a maximum of 60 bytes can be entered.
Monitor
Select this when you want monitoring to start.
p.18
12