Epson EX5220 Szybka konfiguracja - Strona 2

Przeglądaj online lub pobierz pdf Szybka konfiguracja dla Oprogramowanie Epson EX5220. Epson EX5220 4 stron. 3lcd projectors
Również dla Epson EX5220: Instrukcja obsługi (48 strony), Przegląd i specyfikacja produktu (4 strony)

Drukuj stronę
3
EX5220/EX6220/EX7220: To reduce or enlarge the image, turn the
zoom ring.
EX3220: To reduce or enlarge the image, press the Tele (reduce) or
Wide (enlarge) buttons on the projector.
EX5220
EX6220
EX7220
EX3220
4
Turn the focus ring to sharpen the image.
EX5220
EX6220
EX7220
EX3220
5
If your image looks like
off to one side of the screen at an angle. Place the projector directly in
front of the center of the screen, facing the screen squarely. If you can't
move the projector, use the horizontal slider on the projector to correct
the image.
EX5220
EX6220
EX7220
EX3220
6
Your projector automatically adjusts images that look like
but if necessary you can press the
correct it.

Using the remote control

Make sure the batteries are installed as shown (two AA batteries).
Turn projector
on and off
Access projector
menus
Turn off projector
display
For more information on using the remote control, see the online
User's Guide.
or
, you may have placed the projector
or
button on the projector to
Choose which
source to display
Navigate projector
menus
Get solutions to
common problems
Project wirelessly
Follow the steps here to connect the projector wirelessly over an 802.11n,
802.11g, or 802.11b wireless network. With the EX3220 and EX6220, you will
need the optional wireless LAN module (part number V12H418P12).
If you're projecting from a computer, it must have a wireless card or built-in
wireless interface, and be running Windows 8, Windows 7, Windows Vista
Windows XP Professional x64, or Windows XP, or Mac OS X 10.4.11 to 10.8.x.
1
Remove the wireless LAN module cover screw.
2
Connect the wireless LAN module to the projector's USB-A (flat) port.
3
To configure your projector for your wireless network, do one of the
following:
•
If you're using the optional Quick Wireless Connection USB
key (Windows only, part number V12H005M09), press the LAN
button on the remote control. When you see SSID and IP address
information on the screen, remove the wireless LAN module
and connect the key to the projector's USB-A port. Look for the
displayed message, remove the key, and connect it to a USB port
on your computer. Follow the on-screen instructions to install
or
,
the driver, then run your presentation. For details, see the online
User's Guide.
•
If you're not using the key, continue with the steps below.
4
Attach the wireless LAN module cover and secure it using the screw
you removed.
5
Press the Menu button on the remote control, select the Network
menu, and press
6
Choose Network Configuration and press
.
.
,
®