Epson Fiery Spark Professional 2.0 Instrukcja szybkiej instalacji - Strona 17
Przeglądaj online lub pobierz pdf Instrukcja szybkiej instalacji dla Oprogramowanie Epson Fiery Spark Professional 2.0. Epson Fiery Spark Professional 2.0 34 stron. Epson stylus pro 7600; epson stylus pro 9600; epson stylus pro 10000; epson stylus pro 10600;
Drukuj stronę
Installing the Windows Client Software
Follow these instructions to install the software on your Windows client
workstations. This procedure installs the PostScript printer driver with a
connection to the Fiery server's Hold, Print, and Direct print queues. Before
you start, make sure you have installed the TCP/IP protocol and Client for
Microsoft Networks and are able to see the Fiery server through the network.
If you need assistance, ask your network administrator.
For more detailed instructions, or if you need a different connection to the
Fiery server or require LPR printing services, see the User Software Installation
Guide on the Utility Software (or User Software) CD-ROM.
Before you start, make sure the server has been set up as described in the
preceding section and is ready.
This section describes how to install the following software on a each PC client:
PostScript printer driver (see page 14)
•
Command WorkStation (see page 15)
•
ColorWise Pro Tools (see page 15)
•
Fiery Downloader (see page 16)
•
Hot Folder (see page 18)
•
Depending on your configuration, you may not need to install all these
components. Check with your System Administrator if you're not sure.
Installing the Windows Client Software
|
13