Epson FX 890 Podręcznik użytkownika - Strona 32

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Oprogramowanie Epson FX 890. Epson FX 890 48 stron. Impact printer
Również dla Epson FX 890: Arkusz specyfikacji (1 strony), Specyfikacje (2 strony), Podręcznik (11 strony), Instrukcja konfiguracji (2 strony), Podręcznik z informacjami o produkcie (19 strony), Skrócona instrukcja obsługi (12 strony), Specyfikacje (2 strony)

Open the paper guide cover, then press the LF/FF D button to feed

paper backward, or press the Load/Eject U button to feed paper

forward, until the paper perforation is aligned with the tear-off edge

of the printer cover.

Note:

The printer has a minimum and a maximum tear-off position. If you try to

adjust the tear-off position beyond these limits, the printer beeps and stops

moving the paper.

Tear off the printed pages.

Press the Pause button to turn off Micro Adjust mode.

When you resume printing, the printer automatically feeds the paper

back to the top-of-form position and begins printing.

Adjusting the top-of-form position

The top-of-form position is the position on the page where the printer

starts printing. If your printing appears too high or low on the page, you

can use the Micro Adjust function to adjust the top-of-form position, as

described below. Your top-of-form position setting remains in effect until

you change it, even if you turn off the printer.

Caution:

Never use the knob to adjust the top-of-form position; this may damage the

printer or cause it to lose the top-of-form position.

Paper Handling

Tear-off edge of the printer cover

Paper perforation