Epson FX-1180 - Impact Printer Instrukcja konfiguracji - Strona 20

Przeglądaj online lub pobierz pdf Instrukcja konfiguracji dla Oprogramowanie Epson FX-1180 - Impact Printer. Epson FX-1180 - Impact Printer 33 stron. Epson serial impact dot matrix printers
Również dla Epson FX-1180 - Impact Printer: Broszura i specyfikacje (24 strony), Informacje o produkcie (17 strony), Skrócona instrukcja obsługi (16 strony), Podręcznik (11 strony), Specyfikacja (2 strony), Podręcznik (18 strony), Specyfikacje (2 strony), Ograniczona gwarancja (1 strony), Podręcznik referencyjny (34 strony), Skrócona instrukcja obsługi (33 strony)

Installing the software in Windows Me, 98, 95,

2000, or NT 4.0

Follow these steps to install the printer software in Windows Me,

98, 95, 2000, or NT 4.0:

Note:

Installing the printer software for Windows 2000 or NT 4.0 may

require administrator privileges. If you have problems, ask your

administrator for more information.

If you wish to make a floppy disk version of the printer software on

your CD-ROM, insert the CD and run SETUP.exe. In the dialog

box that appears, double-click Create Floppy based printer

driver/utility disks and follow the on-screen instructions.

If you are using the floppy disk version of the EPSON software, make

a backup copy of the EPSON printer software disk or disks before

you begin installation.

If the New Hardware Found screen or any other wizard appears

when you turn on your computer, click Cancel.

If the Digital Signature Not Found screen appears, click Yes. If you

click No, you must reinstall the printer driver as described below.

Installation time varies depending on your computer.

1. Make sure Windows Me, 98, 95, 2000, or NT 4.0 is running

and the printer is turned off.

2. Insert the printer software CD-ROM into the CD-ROM drive.

The Install dialog box appears. If it does not, double-click the

My Computer icon. Click the CD-ROM icon, then select

Open from the File menu. Then double-click SETUP.exe. (If

you are using a floppy disk, insert the disk into the floppy

disk drive. Double-click the floppy disk drive icon and then

double-click the FD-SETUP.exe icon.)

Setting Up the Printer