Dimplex BF33DXP Instrukcja obsługi - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Kominek wewnętrzny Dimplex BF33DXP. Dimplex BF33DXP 14 stron. Fireplace
Również dla Dimplex BF33DXP: Praktyczny podręcznik użytkownika (15 strony), Instrukcja serwisowa (20 strony), Podręcznik użytkownika (14 strony), Instrukcja rozwiązywania problemów (2 strony), Instrukcja obsługi (14 strony), Instrukcja instalacji (14 strony)

Drukuj stronę

Maintenance

Figure 3

Back

Ledge

Rear

side section

Tab

Figure 4

set logset in front of firebox.

Disconnect the logset LED

wire harness from unit

(Figure 4).

Examine the bulbs to

determine which bulbs require

replacement.

unscrew bulbs counter

clockwise.

Insert new bulbs.

re-connect the logset LED

wire harness to the unit.

Log

Ember

bed

Front

Edge

LED Wire

Harness

10.

replace the log by inserting

the rear tab of the logset

under the back ledge of the

fireplace and push down on

the front edge of the logset

until it snaps into place

(Figure 3).

11.

replace log grate using two

screws previously removed.

Purifire™ Filter

The Purifire™ filter supplied in

your fireplace is reusable and

washable. The filter should be

cleaned or replaced on average

once a year, or if overheat

indicator lamp is activated. To

clean the filter gently tap filter

on a hard surface to dislodge

any loose dirt or debris, and

then clean with water. Do not

use soap or cleaning products,

as they may damage the filter.

The filter size is 20" X 10" X

1" rated at mErV 10. If using

an after market filter follow the

manufacturers recommended

replacement instructions.

To replace filter:

Remove the 2 mounting

screws from the air filter

bracket.

Slide forward to remove the

air filter bracket assembly