Toshiba B11MCWE Instrukcja obsługi - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Klimatyzator Toshiba B11MCWE. Toshiba B11MCWE 25 stron. 4-way air discharge cassette type

Drukuj stronę

PARTS NAME OF REMOTE CONTROLLER

1
START/STOP button
Push the button to start operation.
(A receiving beep is heard.)
Push the button again to stop operation.
(A receiving beep is heard.)
If no sound is heard from the receiver, push the
button again.
2
Mode select button (MODE)
Push this button to select a mode.
Each time you push the button, a mode is selected
in a sequence.
A : Auto changeover control,
: Dry,
: Heat (for Heat pump model only),
: Fan only (For Cooling only model), and back to
A. (A receiving beep is heard.)
3
Temperature button (
The set temperature can be raised to 30°C.
The set temperature can be lowered to 17°C.
(A receiving beep is heard.)
4
Fan speed button (FAN)
Push this button to select fan speed. When you
select AUTO, the fan speed is automatically
adjusted according to the room temperature.
You can also manually select the desired fan
speed. There are five settings.
(LOW
, LOW
+
, MED
HIGH
) (A receiving beep is heard.)
5
Auto louver button (SWING)
Push this button to swing the louver.
(A receiving beep is heard.)
Push the SWING button to stop the louver swinging.
(A receiving beep is heard.)
6
Set louver button (FIX)
Push this button to adjust the air flow direction.
(A receiving beep is heard.)
7
Off timer button (OFF)
Push this button to set the OFF timer.
8
On timer button (ON)
Push this button to set the ON timer.
9
Reserve button (SET)
Push this button to reserve time settings.
(A receiving beep is heard.)
10
Cancel button (CLR)
Push this button to cancel ON timer and OFF
timer. (A receiving beep is heard.)
CAUTION
• When pushing the "FILTER" button.
The indoor unit does not operate and the receiver
does not sound a beep.
11
12
13
: Cool,
14
)
15
16
, MED
+
,
3
1
4
13
5
6
8
7
5
High power button (Hi POWER)
Push this button to start the high power
operation.
Memory button (MEMO)
Push this button to store the settings.
Push the button again for 3 seconds or more to
store the setting indicated on the remote control-
ler and
mark is indicated.
P
(Refer to "MEMORY/PRESET OPERATION")
ECO timer button (ECO)
Push this button to start the ECO timer (OFF
timer) operation.
You can select the OFF timer duration.
There are four settings (1, 3, 5 or 9 hours).
PRESET button
Push this button to operate the air conditioner
according to the settings memorized by the
MEMO button.
TIMER button
Use this button to change the clock, to set the
On and Off durations.
To forward the time, push the "TIMER
To set back the time, push the "TIMER
button.
Automatic operation button (AUTO)
Push this button to operate the air conditioner
automatically. (A receiving beep is heard.)
(Refer to "AUTOMATIC OPERATION")
AUTOA
B
AM
:
PM
P
ON
OFF
C
˚
AM
:
PM
HiPOWER
CHK
AUTO
PRESET
START/STOP
FAN
MODE
AUTO
SWING
ECO
Hi POWER
TIMER
TIMER
FIX
MEMO
ON
OFF
SET
CLR
FILTER
RESET CLOCK CHECK
" button.
"
14
2
16
11
12
10
9
15