Epson PowerLite 1825 Instrukcja obsługi - Strona 14

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Oprogramowanie Epson PowerLite 1825. Epson PowerLite 1825 36 stron. Release of check tool for network projectors v1.00 for windows
Również dla Epson PowerLite 1825: Podręcznik użytkownika (42 strony), Szybka konfiguracja (2 strony), Instrukcja obsługi (47 strony), Deklaracja zgodności (4 strony), Podręcznik użytkownika (14 strony), Specyfikacja produktu (2 strony), Lista części (1 strony), Biuletyn wsparcia produktu (25 strony), Biuletyn wsparcia produktu (38 strony), Biuletyn wsparcia produktu (12 strony), Biuletyn wsparcia produktu (42 strony), Biuletyn wsparcia produktu (22 strony), Biuletyn wsparcia produktu (28 strony), Biuletyn wsparcia produktu (41 strony), Biuletyn wsparcia produktu (34 strony), Biuletyn wsparcia produktu (38 strony), Biuletyn wsparcia produktu (28 strony), Biuletyn wsparcia produktu (15 strony), Biuletyn wsparcia produktu (22 strony)

Drukuj stronę

Registering and deleting projectors for monitoring

Monitor

If a Monitor Password has been set for the projector,

Password

be sure to enter the Monitor Password that has been

set. If the correct password is not entered at this time,

it will not be possible to monitor and control the

projector even though it is registered. If using a serial

⇔ TCP/IP conversion adapter to connect the

projector, the Monitor Password security function

cannot be used.

Description

You can enter some kind of memo about the projector.

The details you enter here will be displayed at the

projector properties.

Up to a maximum of 60 bytes can be entered.

Monitor

Select this when you want monitoring to start.

After entering the details, click [Register] to start the

registration. When the message is displayed, click

[OK].

The icon(s) of the projector(s) you registered will be displayed

in "Grouping view" or "Detail list view".

Registering several projectors to a monitoring group

all at once

Projectors that have been registered can then be registered together into

different groups so that they can be monitored and controlled together.

Furthermore, if you select one of the registered groups as the "Parent

group", monitoring and control operations can be carried out for all

projectors in that "Parent group".

A "Parent group" can be set for other parent groups, so that a hierarchical

group arrangement such as the following can be created.

Branch A

Showroom

Lobby

Convention hall

Branch B

Conference room

Reception room

Branch C

Conference room

First, create the registration groups, and then register projectors into the

groups that have been created.

No1

Showroom A

No2

No3

No4

Showroom B

No5

Projector01

Projector02

100

101

102

103

Room 1

Room 3

201

202